Had this Bestem box sitting around that I bought a few years ago for a scooter. Finally put it on something.
Got some 8mm x 1.25 short pieces of metric all thread, nuts, washers and put em here.
http://hondaf6b.com/attachment.php?a...0&d=1477877995
Took some black rubber hose cut it to length, slit it long ways and put em here
http://hondaf6b.com/attachment.php?a...1&d=1477878135
Made an improvised adapter out of some 3/8th" plywood and plasti dip sprayed it
http://hondaf6b.com/attachment.php?a...3&d=1477878416
Used some 1/4 x 20 bolts, nuts, and washers to attach Bestem quick release plate
http://hondaf6b.com/attachment.php?a...4&d=1477878681
Front view
http://hondaf6b.com/attachment.php?a...5&d=1477878809
Rear view
http://hondaf6b.com/attachment.php?a...6&d=1477878903
Rear view,. Antenna does touch box and bend but just a tad
http://hondaf6b.com/attachment.php?a...7&d=1477878977
It's an older 969.with brake but no running lights as lower strip is just a reflector. You can get one with all the lighty lights on eBay for less the a buck. I will probably replace the plywood with a piece of aluminum plate. And the rest of that can of plasti dip.