Several choices
http://www.baggershield.com/honda-wi...df1c2e421aed12
Printable View
Several choices
http://www.baggershield.com/honda-wi...df1c2e421aed12
Here are the windshields we offer specifically for the F6B. All windshields are made of the highest grade, crystal clear aircraft Lucite which offer the industries best clarity and no distortion. Our shields are made .052" thicker than OEM and most aftermarket shields giving them increased rigidity as well. BAGGERSHIELD offers 10% off for all forum members which can be combined with any sales we may be running. Send me a PM to receive your forum member discount code.
Below are some pictures and dimensions for BAGGERSHIELD's F6B line.
Part# TB-F6B-A
http://www.baggershield.com/baggersh...able-p-83.html
This shield adjusts from 11" to 19". The top shield can either be tucked behind the lower shield giving the rider a tinted sport shield for cruising around or can be spun around and mounted up to convert the shield into a touring shield when extra protection is needed. Measurement is taken from the rubber fairing trim to the top of the shield. The shield can be mounted up to 1.25" high making it a 12.25" to 20.25" shield as well. The shield is also 4" wider than the OEM and other aftermarket shields offering decreased buffeting and increased shoulder protection.
http://i1204.photobucket.com/albums/...ps9d766aa0.jpg
http://i1204.photobucket.com/albums/...psb8085c78.jpg
http://i1204.photobucket.com/albums/...psc834d696.jpg
http://i1204.photobucket.com/albums/...psa4a8dee1.jpg
Part# TB-F6B-LF
http://www.baggershield.com/baggersh...ield-p-84.html
This is our 11" sport shield. Measurement is taken from the rubber fairing trim to the top of the shield. The shield can be mounted up to 1.25" high making it a 12.25". The shield is also 4" wider than the OEM and other aftermarket shields offering decreased buffeting and increased shoulder protection.
http://i1204.photobucket.com/albums/...psa790116f.jpg
http://i1204.photobucket.com/albums/...ps9e38293c.jpg
Part# TB-F6B-HFV (Vented)
http://www.baggershield.com/baggersh...ield-p-85.html
Part# TB-F6B-HF (Non-vented)
http://www.baggershield.com/baggersh...ield-p-86.html
Here is our 19" touring shield. Measurement is taken from the rubber fairing trim to the top of the shield. The shield can be mounted up to 1.25" high making it a 20.25". The shield is 4" wider than the OEM and other aftermarket shields offering decreased buffeting and increased shoulder protection. It is available either with or without an adjustable air-through vent system.
http://i1204.photobucket.com/albums/...ps948595fc.jpg
http://i1204.photobucket.com/albums/...ps1187653a.jpg
Ok. I ORDERED ONE TODAY. I HAVEN'T SEEN ANYTHING ELSE LIKE IT. I THINK IT WILL SUIT ME FINE. PLEASE ENSURE I GET THE 10% FORUM DISCOUNT.
I ordered one too, 11"-19" one. Will post pictures as soon as I get it. I decided on it because it looks great tinted on black F6B. I also wanted the Ergomot one, however it only adjusts 4" while this one adjusts 8" taller. I'm afraid Ergomot may be too short for me, I'm 6" tall.
Just installed my new 11" Sport bagger shield. Works perfect for me at 5' 8". It is about 4 to 6 inches down from my line of site and all the air seems to go straight over my helmet.
UPS dropped one at my door this am will install tomorrow!!! :fat:
How did the install go?I have one coming Wed per the FedEx site.I ordered the Vented 19" touring shield as it will fit my 6"4" torso perfect.Can't wait to ride without wind blast.Quote:
Originally Posted by Steve 0080
Sorry but with Mother's day it did not happen ...will do in the a.m. and post a pic!!!
I got the new shield installed...it is wider in the area of the mirrors,,,supposed to make a big difference...should find out Thursday.... I would buy a Baggershield if it did not work just for looks alone....
Which one did you go? 11" or the 11"-19"?Quote:
Originally Posted by Steve 0080
The 11" sport same as the 17" just depends where you are measuring from...just a little wider...The 17" is 2 inches taller...
I ordered my Shield the day they had them ready. It took a while to get it but Spencer let me know there was delay in the vents getting to him and he would ship it ASAP. I think he got the vents in last Thursday May 9th, he shipped it on May10th and I picked it up from the Post office Monday May 13th and I just got back from a buddies who helped me install. I have it set on the lowest setting and I will know after a ride this Sat and Sun on a ride from Charlotte to Boone to Asheville and then back home. Just on my short ride home I could feel the wind just at the top of my helmet, perfect. I never had a vent before but I am pretty sure that will be money well spent and worth the wait.
Looking back it was easy to install and I am sure you guys who do work on your bikes all the time will have it done quickly.
Spencer thanks for treating me well. I have my own Business and know the importance of customer service and Spencer lived up to that.
Pictures to follow!
Installed this Baggershield 19" vented touring shield.Install was easy-shield has 3 holes for mounting with stock F6B windshield hardware.What a difference no more wind blast on my long torso 6'4" frame and the stereo is clear at all speeds.Nice product thanks Spencer.
I am torn between the Baggershield and the clearview. I am 6'3 and the 11 inch slipstreamer makes my head buffer like crazy. I definitely want smoked just not sure if the clearview is worth the money
Quote:
Originally Posted by edgeman55
Do you still look over this one or threw it. Thanks Shawn
I look just over the top of the shield and the buffeting/wind is just at the top of my helmet really not felt.I always like to not have to look thru the shield.Quote:
Originally Posted by 1BADF6B
I just installed my 11" Smoke Colored Sport Shield this weekend!! This is the greatest thing since sliced bread....
Being wider at the bottom blocks a lot of the wind that use to pass through to my hands by the factory shield...
This morning it was about 45 degrees and I rode the whole way to work (30 miles @ 70-75MPH) without having to put the hand warmers on.
This was my best purchase so far!!! :clap2: