Here you go fresh install last week totally stock
Printable View
Installed my new Show Chrome drivers backrest on Thursday, great improvement
For my "old Guy Back". Now have used both, installation about the same, back relief
About the same, don't. See much difference in either.:clap2::clap2::yes::yes:
Absolutely,
The pics I see of other's mounted, look to be much forward than the back of the driver seat
I can almost lay a straight edge at the angle of the back of the driver seat and match my backrest pad angle
I'm extremely happy with the comfort of mine. It allows me to lean back not pushing me forward.
Perhaps my mounting attack angle is different, but just right.
Can't post a pick by phone but hit the link below for pics if you like.
Jim
Attachment 3631
Also, the kit comes with an adhesive grommet to cover the hole in the seat where a slit has been made. It doesn't take on any moisture.
Jim
I went with the Smart Mount backrest with modifications. In "out of the box" configuration" and mounted per the instructions (there's really only one correct way), this backrest was too high (even in it's lowest setting) and too far rearward. As I needed more support in the lumbar area I did the modifications as seen in the attached pics. Took many attempts to get it perfect but after it was all said and done, it's great. This isn't a "one size fits all" backrest and as with many other things I had to modify it to fit my 6'2", 220lb body.
As seen, to move it forward, I made a spacer from 1" square aluminum tube, filled with 5 min epoxy for strength. Then, to get it low enough, I ended up turning the supplied bracket upside down. My lumbar area is now fully supported and it's good for an all day ride.
Nice clean job!
It looks like it is at a comfortable height to me. Enjoy!
In case anyone wants a Sock Seat with a Utopia Backrest already installed, I have one in the classified section for sale.