Also, does anyone know if running the bike without the instrumentation panel will hurt the electronics??
Printable View
What's in your left cubby, center dash storage.
I recently changed my front tire. While removing the black side cover on the fender section I discovered the top tab of the rear fender was broken off with the fender and steel clip still on the black cover.
I didn't hear any rattle, but I'm old and have "selective" hearing as the wife says.
Waiting to find out if Honda will cover this, but that's another thread possibility. Good luck with your fix.
I am going to try Bobs idea.
Now he has got me thinking.
Damn
Doug
Nothing ventured, nothing gained! The old fart philosophy.......KISS......Keep It Simple Stupid:shhh:
Additionally there are more than enough wire connectors under the dash that one could be hitting something. When I changed my air filter and had the dash and surrounding panels off, the wiring, in general, was secured with clips and wire ties. Just another area to check if you're into the adventure of removing the dash:shock:
Attachment 15713Attachment 3282
I removed mine when I installed the front fork brace. Still have the rattle noise over hard bumps. But on the bright side, the bike handles much better with the fork brace. I just try to use the better part of my "lane", to avoid as many hard bumps as possible. I think its the springs, but can't be sure.