So I pulled the center bolt out and pulled off the ERGO IIIs so I could get to the plugs. PUtting them back on, they won't align the same way so they had the give and ratchet lock feel. I pulled down the instructions and they talk about a helix alignment, etc. I see the "peak" in the cap, but nothing seems to lock when I just hand fit it in. When I tighten the bolt in, it just locks tight for a bit then eventually the highway pegs just start moving again. If I uber tighten, it will destroy the washers inside. Ask me how I know. lol

Any suggestions? Seems it should be a simple thing, but something does not seem aligned quite right, but if I try to feel my way around the cap and catch, nothing catches.