Hi,
I ran 'circuitry' up the left side of the bike from a switched line in the fuse box and then across to the sealed cubby on the right side. There I mounted a dual plug USB socket to power, in my case, iPhone and Garmin. From there it's not difficult to route wires around to wherever you mount the devices.
Now circuitry can be a pair of wires, but in my case, I also wanted to add power for heated gear and future farkles. So in said right side cubby I mounted a circuit box by Eastern Beaver (
http://easternbeaver.com/Main/Wiring...PC-8/pc-8.html). At the time, some on this forum suggested that an additional fuse box should be mounted under the seat. I like the right side cubby as it is much easier to get to than removing the #%@$@ seat should I need to replace a fuse (Which I never have had to do).
I know this sounds like a lot of work but it isn't. I used 3M tape to mount the fuse box to the cubby cover itself. Clean install and works great.
Pete
Originally Posted by pdxstriper
Posting Permissions
Reply With Quote