Video/Sound Comparison of stock exhaust to Cobra 6 into 6

[kjelders]

I am totally pleased with the looks and sound. Good job Cobra!

[Scotrod]

Heh heh heh! Was that the same rider on both bikes?

Out on the road, the OEM equipped bike was ridden without blippin/revin', yet the Cobra bike was blippin'/revin'

Is there some kinda connection between the right grip and the Cobra's that doesn't exist with the OEM pipes?

(Nah, just kidding! Sounds a lot quieter than I thought it might!)

[kjelders]

Heh heh heh! Was that the same rider on both bikes?

Out on the road, the OEM equipped bike was ridden without blippin/revin', yet the Cobra bike was blippin'/revin'

Is there some kinda connection between the right grip and the Cobra's that doesn't exist with the OEM pipes?

(Nah, just kidding! Sounds a lot quieter than I thought it might!)

It's required to "blip" with the Cobra's. I didn't have a clear shot to run them like I did when I did the video with the stock exhaust. To many cars in my way.

[Steve 0080]

I had the opportunity to here them in person in Daytona, ....I will be pulling the baffles this week !!! The video was JUST what folks have been asking for !!!!! Thanks !!!!!

[Scotrod]

It's required to "blip" with the Cobra's. .

Heh heh heh! I kinda figured that was the case!!!

I'm trying very hard to behave myself on the 6,,, I'm pretty sure I'd be a blippin, zippin, and doing all kinds of things I probably shouldn't be doing if I 'could make it talk'!!

Worse yet, for reasons I cannot disclose, I MUST ride like an Angel,,, for now,,,,

[kjelders]

I did put about 100 miles on the bike yesterday and found with the baffles removed, TOO LOUD! Yea, I know, KJ former owner of a Harley Ultra with stage one kit says it's too loud. There is also a very noticeable loss of back compression without any baffles. That is to be expected since it's basically a straight pipe exhaust at the moment. However, the tone of the Cobra's are awesome.

So here is my plan. I'm going to put 1 baffle in each side, (not sure which of the 3 pipes to do this yet) and check the volume of the sound. If I don't like that, then I'll add another baffle to each side. I will find the right volume sooner or later.

One other note. I passed by a parked car while shifting into 3rd and set the car alarm off! Can you believe that.....a Goldwing.....sets off a car alarm in the open air? Harley's got nothing on me!

[flyboy]

I did put about 100 miles on the bike yesterday and found with the baffles removed, TOO LOUD! Yea, I know, KJ former owner of a Harley Ultra with stage one kit says it's too loud. There is also a very noticeable loss of back compression without any baffles. That is to be expected since it's basically a straight pipe exhaust at the moment. However, the tone of the Cobra's are awesome.

So here is my plan. I'm going to put 1 baffle in each side, (not sure which of the 3 pipes to do this yet) and check the volume of the sound. If I don't like that, then I'll add another baffle to each side. I will find the right volume sooner or later.

One other note. I passed by a parked car while shifting into 3rd and set the car alarm off! Can you believe that.....a Goldwing.....sets off a car alarm in the open air? Harley's got nothing on me!

I took one baffle out on each side and that seems to be about right for me!

[kjelders]

I took one baffle out on each side and that seems to be about right for me!

I put 2 back in each side. The one pipe I left the baffle out was the top longer pipe on each side. The top pipe sticks out father from the saddlebags so the sound won't resonate under the bags. I think this setup is right for me as well.

[CobraUSA]

I am totally pleased with the looks and sound. Good job Cobra!

Thanks! Glad you're enjoying them

[MercuryF1]

Thanks! Glad you're enjoying them

When can we expect the 'black' versions?