You might be able to get some at ACE hardware.
[SIGPIC][/SIGPIC]
Retired USAF
1974 - 1994
Hey WillTill, Are those spacers all the same length? or are the ones up next to the backrest shorter then the ones towards the rear of the bike?
Could I use a piece of PVC pipe and cut it down or is that too primitive? Just thinking, but that would look a little ugly.
21 years Army (retired)
...been everywhere, seen everything, done almost everything.
IBA 80537
The diameter of both spacers is 5/8"
Here are the other metrics:
21 years Army (retired)
...been everywhere, seen everything, done almost everything.
IBA 80537
Lowes has the spacers you need cheap, may have to paint them black.
Yep, saw them this morning at Lowes. They had the chrome plated ones and black plastic spacers. They had the 1/2" for sure, not so sure about the 1 1/8" length but did have the 1" length. I made a back rest extension a few months ago and sprayed it with black Flex Seal. That stuff is hard to scrape off with a utility knife. You might give that stuff a try to make 'em black since they won't get any abuse under the rack.