F/F Brain bucket now ready...

[willtill]

...for winter

Spent half of the morning installing my Sena comm's in it; I'm very anal sometimes about particular things; and my helmets are one of my challenges to get it "just right"

I opted to try the adhesive mount for the Sena this time; I could not get an adequate install with the Sena clamp type mount. I did remove the Sena adhesive pad though; and I have some leftover 3M VHB adhesive pads from my Ion camera fixings... so I expect it will actually take an impact (knock on wood that DOESN't happen ) to dislodge the Sena mount.

Also mounted my spare Ion video camera on top. I normally mount these cameras on the side of the helmet, but this particular Bell helmet didn't afford my the exacting curvatures to do so.

This particular Bell helmet also has a cutout for a different comm unit; but my Sena 20S would not fit in it. The cutout also generated quite a bit of noise so I caulked the hell out of it and it is now quite soundproof

[Av8er]

Looking good but what is this “winter” you speak of? I am in shorts right now, fixing to put on my riding clothes and go for a quick ride. Can’t go to far as I have meat on the smoker and beer that needs to be drank.

[willtill]

Looking good but what is this “winter” you speak of? I am in shorts right now, fixing to put on my riding clothes and go for a quick ride. Can’t go to far as I have meat on the smoker and beer that needs to be drank.

One day we shall emigrate south. Until then.. I must make do with my current climate

As long as there is no salt, ice or snow on the ground... I shall will ride.

[willtill]

Here's the backside of it. I do all of my helmets like this. Reflective red tape (from the white/red reflective DOT strips you can find at Walfart, Perv Boys, etc)

[Hornblower]

Here's the backside of it. I do all of my helmets like this. Reflective red tape (from the white/red reflective DOT strips you can find at Walfart, Perv Boys, etc)

Nice job! I hope you don't mind but I liked it so much I copied it

[DMAGOLDRDR]

[QUOTE=willtill;159897]Here's the backside of it. I do all of my helmets like this. Reflective red tape (from the white/red reflective DOT strips you can find at Walfart, Perv Boys, etcQUOTE]



Nice job with the reflective tape.
'
A riding friend has this..and it works pretty well. As he turns his head the arrow points the way.

http://www.aerostich.com/arrow-head-...ndicators.html

[willtill]

It's interesting how people react when you are looking at them with a helmet camera. I occasionally get a query of "excuse me, what is that on your helmet; a camera?" from motorists around me.

Also when running down the road adjacent to motorists; and if you give them a long glance and they see you looking at them with the camera attached to the helmet; it seems to develop somewhat of a neutral; or calming effect while they are hellbent in heavy traffic alongside of you. You may ( I can) sense a otherwise slightly reckless driver alongside of me suddenly going "dormant" as they see me looking at him. Not sure if its the knowledge that they're on video, or just the wonderment that they are exhibiting of my helmet camera...

At any rate it works for me...

[shortleg0521]

...for winter

Spent half of the morning installing my Sena comm's in it; I'm very anal sometimes about particular things; and my helmets are one of my challenges to get it "just right"

I opted to try the adhesive mount for the Sena this time; I could not get an adequate install with the Sena clamp type mount. I did remove the Sena adhesive pad though; and I have some leftover 3M VHB adhesive pads from my Ion camera fixings... so I expect it will actually take an impact (knock on wood that DOESN't happen ) to dislodge the Sena mount.

Also mounted my spare Ion video camera on top. I normally mount these cameras on the side of the helmet, but this particular Bell helmet didn't afford my the exacting curvatures to do so.

This particular Bell helmet also has a cutout for a different comm unit; but my Sena 20S would not fit in it. The cutout also generated quite a bit of noise so I caulked the hell out of it and it is now quite soundproof

Will if you get the chance let me know if you feel the wind pull on your camera.
Am think about mounting mine in same position.

[willtill]

Will if you get the chance let me know if you feel the wind pull on your camera.
Am think about mounting mine in same position.

Do not feel the wind pulling on it at all. Like it's not even there.

[shortleg0521]

Do not feel the wind pulling on it at all. Like it's not even there.

Thanks my friend.