KING TOUR PAK ON THE B - Page 2
Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: KING TOUR PAK ON THE B

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member ths61's Avatar
    Join Date
    Aug 2013
    Location
    So Cal
    Posts
    1,815
    Quote Originally Posted by shortleg0521 View Post
    In looking at the cable , it has a cable with about four pins then plugs into the audio unit
    under seat. Still trying to figure this one out. would love to put the antenna on the tour pack.
    any picts or part numbers would be great, this would make a great heated garage winter project
    to keep a winter mind working.
    Shortleg0521,

    My antenna is under the deck so I can't examine it. If memory serves, the antenna either screws onto a stud, or has a stud to screw into a female threaded base (a variation of the picture below). Inside of the HD trunk, the AM/FM has it's screw on attachment. You should be able to make a patch cable with screw on connectors on each end. Maybe start with a HD patch cable and modify the other end to attach to the B's mount ? Instead of trying to match up the proprietary Honda clip, try using the threaded mount as a connection point.

    Maybe JimmyTee can chime in on how he connected his powered antenna. I don't know if he hooked it up to the Honda OEM head unit or one of his aftermarket units.




  2. #2
    Senior Member Switchmonkey's Avatar
    Join Date
    Jul 2016
    Location
    Petawawa, ON
    Posts
    158
    I’m intrigued by the gizmo between your Dale rack and the rear deck with the 2 large bolts. Is it part of the Dale rack mount?
    2016 F6B Matte Grey
    2016 XDiavel (Sadly...gone)
    2014 M109r (FHD Classic) (Sadly...gone)
    2014 VRSCF (Gone)
    2006 VTX 1300C (Gone)

    "I find as I get older that I have less and less to say about more and more. I thought I was mellowing as I got older, turns out I just don’t give a sh1t.”

  3. #3
    Senior Member Walcrow's Avatar
    Join Date
    Apr 2017
    Location
    Dallas, Texas
    Posts
    627
    Quote Originally Posted by Switchmonkey View Post
    I’m intrigued by the gizmo between your Dale rack and the rear deck with the 2 large bolts. Is it part of the Dale rack mount?
    Are you referring to the hex head bolts or the allen head socket bolts? The hex heads hold the front of the rack to the front spacers and the round socket head allen bolts are where the backrest post mounts.

  4. #4
    Senior Member Switchmonkey's Avatar
    Join Date
    Jul 2016
    Location
    Petawawa, ON
    Posts
    158
    I see. The Allen bolts are part of the passenger backrest? Honda part, or aftermarket? Looks quite a bit different than the one I have.
    2016 F6B Matte Grey
    2016 XDiavel (Sadly...gone)
    2014 M109r (FHD Classic) (Sadly...gone)
    2014 VRSCF (Gone)
    2006 VTX 1300C (Gone)

    "I find as I get older that I have less and less to say about more and more. I thought I was mellowing as I got older, turns out I just don’t give a sh1t.”

  5. #5
    Senior Member Walcrow's Avatar
    Join Date
    Apr 2017
    Location
    Dallas, Texas
    Posts
    627
    Those are aftermarket allen head bolts. I usually get rid of the stock bolts and go with grade 8 when I can. Had those spares laying around and used them since I had extended the back rest about 4 to 5 inches higher for the GF. She found lots more comfort with the back rest higher. Then when I went with the KIng Tour Pak, the back rest had to come off. Now she really likes the Pak with the arm rests and feels "safer" with the Pak back there.
    Last edited by Walcrow; 04-03-2018 at 09:02 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •