helmet lock cable
Page 1 of 2 12 LastLast
Results 1 to 10 of 24

Thread: helmet lock cable

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member olegoat345's Avatar
    Join Date
    Nov 2016
    Location
    Central, Fl.
    Posts
    1,234
    I made mine using 1/16" (1/8 will work) wire rope (ACE HW), covered it w/ heat shrink b-4 I crimped it. cost less than $3. I made it long enough to go around chin bar. It loops around my gas cap for storage.
    Honestly, I didn't know I was suppose to have one. Guess the previous owner did something w/ it.

  2. #2
    Senior Member 2wheelsforme's Avatar
    Join Date
    Dec 2016
    Location
    Gulf Breeze, Florida
    Posts
    1,444
    I'm thinking not all F6Bs came with a lock.

  3. #3
    Senior Member 2wheelsforme's Avatar
    Join Date
    Dec 2016
    Location
    Gulf Breeze, Florida
    Posts
    1,444
    Yes I made one also and they made my loops a crimp connection at the local boat supply store. Cable was already plastic coated. I also made one long enough to go thru a leather jacket sleeve so it also can be locked. But seldom park where I feel locking things up are necessary.

  4. #4
    Senior Member olegoat345's Avatar
    Join Date
    Nov 2016
    Location
    Central, Fl.
    Posts
    1,234
    Great thinking about running it through the jacket sleeve. I think I'll give it a try too. Thanks for the idea.

  5. #5
    Senior Member
    Join Date
    Dec 2013
    Location
    Brooklyn Center MN
    Posts
    867
    Quote Originally Posted by 2wheelsforme View Post
    I'm thinking not all F6Bs came with a lock.
    Yours is the first I’ve herd. Maybe the previous owner replaced the left hand rail. The discription of the bolt that holds it is a “one way” bolt. Next time you have that hand rail off look and see if there is an empty bolt hole. Over the years there have been several that have had problems with the helmet lock. If the hole is full some one may have ground off the bolt to remove the lock. Generally a one way bolt has a grabbing surface that that can only tighten or breaks off leaving a flat surface.

  6. #6
    Junior Member
    Join Date
    Nov 2013
    Location
    Winter Haven Fl.
    Posts
    6
    Didn't get 1 when I bought my F6B, went back to Honda dealer, they gave me a new one.
    Thanks Mike

  7. #7
    Senior Member
    Join Date
    Dec 2013
    Location
    Brooklyn Center MN
    Posts
    867
    Quote Originally Posted by dyerider View Post
    Didn't get 1 when I bought my F6B, went back to Honda dealer, they gave me a new one.
    Thanks Mike
    Lock or cable?

  8. #8
    Senior Member 2wheelsforme's Avatar
    Join Date
    Dec 2016
    Location
    Gulf Breeze, Florida
    Posts
    1,444
    Just a hole in the left handrail with 3 openings. No damaged or scratches so looks like nothing has been in there before.

  9. #9
    Member InvictusF6B's Avatar
    Join Date
    Sep 2015
    Location
    Jacksonville, NC
    Posts
    44
    You could try Making your own as I did. I still have my original one but didn't like how short it was. The original cable's length did not permit me to leave the helmet resting on my seat while locked. I took some small gauge plastic coated steel cable and crimped in two loops. I made the end that goes through my d rings smaller than the other to make it easier to run the cable through. I feel it works better than the original because its longer and it has no uncoated cable in contact with my bike.
    2015 Blue F6B Deluxe, Mods: Bagger shield, Heli Bars, Garmin ZUMO, Beverage Butler, LED HIs/Lows, Pathfinder Switchbacks, Smoked Lenses. Kury Ergo IIIs, Iso foot rests, Transformer Passenger floor boards, Reflector replacement Lights, Trailer Isolation harness, Iso Grips, Smart Mount Backrest, Luggage rack, Homemade Lightning Strike, TBR Exhaust, ADD ON Hitch, Healtech Brake flasher, J&M upgraded speakers. K&N Air filter, LED Accent lights, Custom flag bar, Tritium Led Fog lights, Air Wings...

  10. #10
    Senior Member willtill's Avatar
    Join Date
    Aug 2015
    Location
    Maryland
    Posts
    4,622
    Gun cable lock. Would not and/or doesn't everyone have an abundance of these at home?




    21 years Army (retired)
    ...been everywhere, seen everything, done almost everything.

    IBA 80537

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •