1: Front Right Brake Upper Bleeder Valve 2: Front Left Brake Middle/lower Bleeder Valve 3: Front Left Brake Upper Bleeder Valve 4: Front Right Brake Lower Bleeder Valve 5: Rear Brake Lower Bleeder Valve 6: Anti-Dive: bleeder valve on top 7: Rear Brake Upper Bleeder Valve
Do these two additional steps to be sure you have no residual air bubble in the rear system. ( I did not have to perform these)
8: Pressure bleeding the lower Junction block. (Upper left side of frame sitting on bike). Follow rubber hose from Secondary master cyl to the Junction block. 9: Pressure Bleed the top Banjo bolt on the Secondary Master Cyl. (To be sure the air bubble is completely out)