Bleeding Sequence:

1: Front Right Brake Upper Bleeder Valve
2: Front Left Brake Middle/lower Bleeder Valve
3: Front Left Brake Upper Bleeder Valve
4: Front Right Brake Lower Bleeder Valve
5: Rear Brake Lower Bleeder Valve
6: Anti-Dive: bleeder valve on top
7: Rear Brake Upper Bleeder Valve

Do these two additional steps to be sure you have no residual air bubble in the rear system. ( I did not have to perform these)

8: Pressure bleeding the lower Junction block. (Upper left side of frame sitting on bike). Follow rubber hose from Secondary master cyl to the Junction block.
9: Pressure Bleed the top Banjo bolt on the Secondary Master Cyl. (To be sure the air bubble is completely out)