Mirror Wind Deflector

[RickW]

After reading several posts on wind deflectors I picked up a National Cycle deflector today from J&P. A little expensive for two pieces of plastic and some hardware, 69.99. Install should be about 15 minutes, but I tend to skip over some instructions. After re-reading the directions and dicking around, plus getting sidetracked, it took about 1/2 an hour.

I haven't had a chance to go on the highway, but even around the neighborhood at no more than 40 MPH I can tell they do the job. I still guess I'm gonna have to bust out a couple hundred for a better windshield, but I really like the look of the stock one...just another dilemma for an old guy to solve.

All-in-all a good product that seems to do what it is supposed to do.

I have those on mine also, work great. I have had both Baker's and National Cycle. You will really like them on the highway.
Look us up next time, we have them for about $10 cheaper.
Rick

[bobbyf6b]

We've covered this before, but the mirror wings don't just deflect air off the riders hands and arms. They also reduce wind noise and buffeting for the rider and passenger. I can hear my radio better with them installed. Function over fashion for me in this case.

[rumble-b]

I made my own deflectors. They work fine and being black, they blend in with the fairing.
Attachment 6395Attachment 6396Attachment 6397

[FlaMike]

Got Bakers. Really help keep the cold air off your hands during those brutal FLA winters.. .

Opening them diverts some air onto rider during hotter weather.

[SmallPasture]

I made my own deflectors. They work fine and being black, they blend in with the fairing.
Attachment 6395Attachment 6396Attachment 6397

Very nice! How are they attached to the mirror. Need a pic from the cockpit side.

By the way! Really like your avatar. I'm working on a design for some badges for my Killer Bee and that is damn near if not exactly the artwork I'm playing with. Isn't that the dodge bee logo?? I gunna have to look that one up! Thanks RumbleB

[rumble-b]

Very nice! How are they attached to the mirror. Need a pic from the cockpit side.

By the way! Really like your avatar. I'm working on a design for some badges for my Killer Bee and that is damn near if not exactly the artwork I'm playing with. Isn't that the dodge bee logo?? I gunna have to look that one up! Thanks RumbleB

Thanks SmallPasture. I made the brackets out of right angle aluminium and they mount to the existing holes under the mirrors. Just removed the oem bolts and screw the longer ones in.They have Nyloc nuts and rubber washers so that i can tighten them up but still pivot them. You're right about the Killer Bee, it is the Dodge Logo. We don't have that in Australia but when i was doing research on the F6B before buying it. i read a review that said " at full throttle the F6B sounds like a 265 Hemi motor" So i thought naming my bike Rumble-B was quite appropriate and found some logos on ebay to put on the bike

Attachment 6411Attachment 6412Attachment 6413Attachment 6414