Mine will do it if I start it and take off before it has a chance to run for a few seconds, if I start it and then put on my helmet and gloves it does ok.
Mine will do it if I start it and take off before it has a chance to run for a few seconds, if I start it and then put on my helmet and gloves it does ok.
Mine has 3400 miles on it and it doesn't stop hesitating until it reaches normal operating temp. Very annoying. I don't know too many people that sit and wait for there engine to reach operating temp.
My bike hesitates before it's up to full operating temperature also. It will also hesitate if the engine is shut off for about 30 minutes and the restarted. I've installed the NGK Irridium plugs and have varied the gap setting from recommended, but there is no change. It's obvious that the cold start and warm up fuel mapping is incorrect. Although the bike runs fine when warmed up, the cold start hesitation is very annoying and a possible safety issue. My dealer's only response is to let the engine come to full operating temperature before ridding the bike.
I've never NOT done this....no issues.
But inquiring minds and the helicopter pilot in me (if it hasn't gone wrong yet, it is about to go wrong) needs to experiment and see if this is an issue.
Today, helmet & gloves first, sit on bike, aim bike out the driveway, start and GO!
We'll see what happens....
Cheers,
Steve
My girls:
Isleen - 2014 F6BD
Saorla - 1995 FLSTN Heritage Special
"Politeness, n: The most acceptable hypocrisy."
Ambrose Bierce
Mine idles kind of high until it warms up but no stumble at all.
+1 No problems at all with the warm up period. Start it up when cold and ride off.
Ray
2013 F6B Deluxe with Hannigan Trike Kit (all repainted metallic silver)
2007 EZGO Electric Golf Cart
Mine has to be warmed up, otherwise if stutters and takes off. 2013f6b standard. Thought it was just me being new, its my first ride and have had it 11 months, at 9k miles right now. Still does it.
I'm sure the high idle is the computer compensating for the cold engine as mine does that when cold. I start mine put on the gear, gloves, helmet and such and by that time the idle is down and it has never hesitated when cold at all. I don't really like starting a cold motor and just hitting it right away. I even let my truck and cars warm a bit before moving just to get the oil flowing without a load on the motor.