These are a high output LED strip I have been toying with they are lots brighter than the picture its hard to capture, welcome any feedback
These are a high output LED strip I have been toying with they are lots brighter than the picture its hard to capture, welcome any feedback
Pete, let me be the first to say...YES ! They look good. Is there any functional reason to keep those vents open for anything, or is it fine to block the very small amount of air that would have gotten through ?
Are the lights going to be available in different colors ? We know that Red and Blue are out of the equation, due to legal reasons, but what about other colors ? Just asking.
Having had the front of the fairing apart a couple of time to swap out windshields, I have to agree with you on the lack of need for those vents.
And, I do thing Amber lights would go very well with our Amber turnsignals. The Amber lighting makes it stand out as different than the headlights, and makes them easier to see.
If available in Amber...I will take a set !
I like it, would buy them. Price?
Also, may I suggest similar lights in vertical vents on side fairings facing front? I know Kuryakyn is coming out with some for them, but I don't like them as they are overdone with chrome.
Already ahead of ya pimp ...
20130407_204350.jpg
front1.jpg
20130407_204145.jpg
bike1.jpg
That was my original idea we already had a bar that we fitted in that slot but had to trim some of the inner panel to fit these new stops we supposed to fit a little better but to get the intensity right they need to be a little thicker than we had hoped so you would need to trim the panel.
Strips are $69 with plug and play connectors.
I agree, that triangular piece should be on your bike. If it is not, then it is possible the dealer left it off. I have not seen these bikes come in the crates yet...so given that they have such a short windshield...it is possible that the windshield is already in place when the bike is shipped. If it is not already in place, and the windshield needs to be installed by the dealer during the PDI, then the dealer left that triangular piece off during the install.