F6B quality issues?

[Scotty57]

This is my first post on this forum. I recently bought a 2013 new F6B and rode it 120 miles to my home. Love the bike other than needs a better windshield. But when I was cleaning it later that week I noticed a couple of issues.

1. An apparent oil leak on the left side of the engine on top of what I think is the valve cover.

Attachment 12256

2. On the right side of the engine there is a loose piece of metal. Looks like it is just there to hide a weld in the engine. But it moved when I touched it cleaning the bike. There is a piece of adhesive tape under it that looks like is supposed to hold it in place. I can probably fix this by adding another piece of adhesive tape.

Attachment 12257

Has anyone else seen these particular issues? My main concern is the oil leak.

Thanks in advance.

[BACA]

This is my first post on this forum. I recently bought a 2013 new F6B and rode it 120 miles to my home. Love the bike other than needs a better windshield. But when I was cleaning it later that week I noticed a couple of issues.

1. An apparent oil leak on the left side of the engine on top of what I think is the valve cover.

Attachment 12256

2. On the right side of the engine there is a loose piece of metal. Looks like it is just there to hide a weld in the engine. But it moved when I touched it cleaning the bike. There is a piece of adhesive tape under it that looks like is supposed to hold it in place. I can probably fix this by adding another piece of adhesive tape.

Attachment 12257

Has anyone else seen these particular issues? My main concern is the oil leak.

Thanks in advance.

Item 1 - I have never had an oil leak there on all the Gold Wings I've owned........might be from when the Dealer serviced the bike before the sale....pure speculation on my part.

Item 2 - I think that piece is there to hide the weld, as you say.........I put a thicker piece of double sided tape on both of mine just to make sure I didn't loose them somewhere.

Hope that helps!!
Ride Safe....But Often!!!

[srt8-in-largo]

Huh. interesting.

Item 1 is hopefully just something that got spilled onto the bike? The crankcase breather is tucked back in there; if it's clogged, some oil could seep out if there's an opening in the hoses.

Item 2 I never noticed, but just went outside and checked. Sure enough it's just a loose cover attached to the frame rail! No biggie; new 3M double sided tape and you're back in business.

[Coop creek]

That plastic cover over the frame weld is held on at the top with a tiny plastic pin, you will probably need a new one (get two) from the dealer, and use Scotch Extreme mounting tape on the back of the cover to make it stick to the frame.

[CheesyRider]

I think 2013 is the only year to get the weld covers. You could remove both of them for a more modern look!

[vstar09]

just covers the welds...mine loose too....no biggie....a dab of silicone and back on...

[Dirtstiff's F6B]

Wipe it off, check the oil level and monitor.
The weld cover and double sided tape is an issue??

J