Rivco Highway peg mount
Results 1 to 8 of 8

Thread: Rivco Highway peg mount

  1. #1
    Senior Member
    Join Date
    Apr 2015
    Location
    Lexington,Illinois
    Posts
    724

    Rivco Highway peg mount

    Do any of you have any experience with this mount by Rivco?
    1” OR 11/4” ENGINE GUARD MOUNTS FOR HIGHWAY PEGS.
    Attachment 13884
    I was wondering with pegs mounted if they stick way out.
    thanks,
    Doug

  2. #2
    Senior Member DaWadd's Avatar
    Join Date
    Jul 2014
    Location
    Winnipeg, Manitoba, Canada
    Posts
    704
    New product from Rivco I believe. Was looking at them on their website and maybe a good option to their very pricey highway pegs. I don't think they would stick out any more than the Kurys or MickOPegs. I'm thinking going that route but only come in chrome .
    2013 F6B in black of course

  3. #3
    Senior Member
    Join Date
    Apr 2015
    Location
    Menomonie, Wi
    Posts
    1,116

    pegs

    I don't have the Rivco, I have the Kury- Ergo II. Looking at your pic, it is very similar. They do stick out somewhat, but the Kurys will fold up, maybe the Rivco also does, when not in use, but they have to stick out a bit, or you wont get your legs around the lower fairing so to rest your feet. When mounted properly, they don't interfere with turning/leaning.

  4. #4
    Senior Member
    Join Date
    Apr 2015
    Location
    Lexington,Illinois
    Posts
    724
    Thanks JM.
    I am not wanting chrome,so I guess this is a moot point when only available in chrome.

  5. #5
    Senior Member
    Join Date
    Apr 2015
    Location
    Menomonie, Wi
    Posts
    1,116

    Black

    The Ergo II's I got were gloss black. Got them thru Cruiser Customizing. $184.95. Standard shipping was free, and took less than a week.

  6. #6
    Senior Member
    Join Date
    Apr 2015
    Location
    Lexington,Illinois
    Posts
    724
    Jm,
    how far back did they come?
    I am short legged at 30" inseam.

  7. #7
    Senior Member
    Join Date
    Apr 2015
    Location
    Menomonie, Wi
    Posts
    1,116

    pegs

    I have a 32" inseam and they work great for me. 2" shorter may be a slight issue. I am not quite fully stretched, but close. They do have several adjustment positions, though. They are a 3 piece unit- 1st piece mounts on the crash bar, the second- the " arm", mounts to that, and finally the footrest mounts to the arm. The arm is about 2" long. I have seen the Ergo III models that now offer a 4" arm. The arm will pivot forward and back and up or down , to your preference. You may be able to get a 4" arm for the Ergo II also.

  8. #8
    Senior Member
    Join Date
    Apr 2015
    Location
    Lexington,Illinois
    Posts
    724
    I will check into the longer arm.
    Thanks for the reply.
    I was afraid I would be to extended.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •