Originally Posted by
Miles
This rear shock pre-load adjuster bothers me. WHY ? Because it is NOT the correct one for this bike. Period.
After having tried several different settings, from half-way...to one quarter way...to one ten way...I just coleted my ride down to Redding, Cal to have my seat done, and the entire ride I had it set at 2 clicks...one full turn...out from the lowest setting. It was even a little bit firm there. I will adjust it today down to only 1 click...a half turn out from the lowest setting possible.
So, you tell me...if a shock pre-load adjuster has a total travel of 19 full turns, or 38 clicks, and we are using it at 1 click, or maybe 2 clicks...and those that have tried it at 6 clicks or up to 15 clicks have all found it to be toooooooooo firm, then in reality we are only able to use the lowest 10 % of the adjustibility of this pre-load adjuster.
That means, the remaining 90 % of the pre-load adjuster is of no use to us. To me, that indicates that they have used the WRONG pre-load adjuster on this bike. We should be able to use up to 50 % of more of the pre-load adjusters range...not the lowest 10%.