I would like to know the source of those floorboards, have not seen any like them.
I would like to know the source of those floorboards, have not seen any like them.
The most important things in life aren't things.
Fall down seven times, get up eight.
Those are Goldwing passenger floorboards. Goldwing as GL1800 full bore wing. They are all over eBay. I got a used set for about $75 and refurb' them and repainted.
I have a roll of clear and black skateboard tape I was going to install for that very reason. Great minds sir.
I did repaint the floorboards. The black I used was a very close metallic match to the 2015 Super Fast Matte Silver models blackish frame parts. From side angles it does compliment very well to the frame color. If you would like, I can shoot a pic of the rattle can color I used.
[SIGPIC][/SIGPIC]
2015 F6B Deluxe
Matte Silver
Please do if you don't mind that looks really good. Any major prep work to them or just clean and spray?
2016 Polaris Slingshot
2015 Matte Silver F6B
2014 GoldWing Tourer
2014 Valkyrie F6C
2015 Mustang GT
2014 Focus ST3
Total disassembly which is easy. Cotter pin, long pivot pin, ball bearing, bearing spring and a bearing cover plate, then the mount, the board and the board decorative trim plate and two bolts that hold the decorative trim plate. Soaked all metals in mineral spirits, sanded the scratches, primed, painted and cleared. When you reassemble you need to put some sacrificial rubber or other material where the foot board and the board mount meet when the board is deployed downwards. Those two surfaces will rub and you will lose some paint and then the board mount will look yucky when the board is flipped back up. I bought some thin black neoprene sticker material on eBay. Can't see it when the board is up. Grease the ball bearing and bearing spring. All done.
Good luck
Attachment 15207
[SIGPIC][/SIGPIC]
2015 F6B Deluxe
Matte Silver