Gold Wing Trunk on an F6B
Results 1 to 10 of 22

Thread: Gold Wing Trunk on an F6B

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    Sep 2013
    Location
    Springfield, IL
    Posts
    121
    Not sure this will help but many rear seat passengers have felt a little uneasy with the Deluxe stock backrest being so low. I installed an adjustable height bracket that the Honda dealership out of Storm Lake Iowa (712) 732-2460 sells and my passenger loves it. I paid $150.00 at the time, not sure what it is now but well worth the money. Might be a much more cost effective solution to make your passenger feel secure.


  2. #2
    Senior Member Dave Ritsema's Avatar
    Join Date
    Feb 2014
    Location
    South Bend IN
    Posts
    395
    Thanks for the advice, however I did replace the stock backrest with an extended version from Ultimate Seats. She feels more "tucked in" to the trunk plus the rear speakers are nicer for the passenger.

  3. #3
    Member Hdnvn's Avatar
    Join Date
    Jul 2015
    Location
    Manassas Virginia
    Posts
    61
    I purchased a trunk on eBay for around 60.00 and retrofitted it by matching the attachment points from the luggage rack and using spacers that I cut from steel hollow rod that Home Depot carries.
    My wife felt the same as yours with the backrest and the trunk comes with a wraparound seat that when my wife got on it yesterday for the first time gave it two thumbs up.
    The trunk comes in gloss black matching my bike perfectly although the paint job is as would be expected...depot carried M8x70 and M8x50 bolts,spacers measured to match were cut at 1 5/8" and around the 2" mark. This gets the trunk relatively level when attached. I placed two sheets of steel under and inside the trunk sandwiching it in order to stiffen the installation. The key point to all of this is that this assembly is removable. That was the attraction to the Harley I owned...detachable backrest. It'll take me about ten minutes to attach or detach, well worth it to have a happier wife on board. Attachment 16250Attachment 16251

  4. #4
    Senior Member valkmc's Avatar
    Join Date
    Oct 2014
    Location
    Ocala Fl.
    Posts
    514
    Quote Originally Posted by Hdnvn View Post
    I purchased a trunk on eBay for around 60.00 and retrofitted it by matching the attachment points from the luggage rack and using spacers that I cut from steel hollow rod that Home Depot carries.
    My wife felt the same as yours with the backrest and the trunk comes with a wraparound seat that when my wife got on it yesterday for the first time gave it two thumbs up.
    The trunk comes in gloss black matching my bike perfectly although the paint job is as would be expected...depot carried M8x70 and M8x50 bolts,spacers measured to match were cut at 1 5/8" and around the 2" mark. This gets the trunk relatively level when attached. I placed two sheets of steel under and inside the trunk sandwiching it in order to stiffen the installation. The key point to all of this is that this assembly is removable. That was the attraction to the Harley I owned...detachable backrest. It'll take me about ten minutes to attach or detach, well worth it to have a happier wife on board. Attachment 16250Attachment 16251
    I like that. I had a similar set up on my C-14. Took around 10 minutes to install\remove. Your right a happy wife on as a rider is priceless.

  5. #5
    Senior Member JackB's Avatar
    Join Date
    Jun 2014
    Location
    Two Rivers Wi
    Posts
    951
    Have you seen the new 2016 black and grey Goldwing?
    Very sharp and the bottom is blacked out.

  6. #6
    Senior Member 98valk's Avatar
    Join Date
    Jun 2013
    Location
    Albq, NM
    Posts
    790
    I think that I got the same trunk. But, I mounted mine as low as possible. I think it looks better.

    100_3158.jpg

    100_3160.jpg

    100_3162.jpg
    Albuquerque, NM

  7. #7
    Senior Member Felloverboard's Avatar
    Join Date
    Sep 2014
    Location
    Apopka, FL
    Posts
    277
    Attachment 16258100_9595 Pc.JPG
    Trunks attach to the stock luggage rack

  8. #8
    Junior Member
    Join Date
    Aug 2015
    Location
    Danbury, CT
    Posts
    29
    Quote Originally Posted by Hdnvn View Post
    I purchased a trunk on eBay for around 60.00 and retrofitted it by matching the attachment points from the luggage rack and using spacers that I cut from steel hollow rod that Home Depot carries.
    My wife felt the same as yours with the backrest and the trunk comes with a wraparound seat that when my wife got on it yesterday for the first time gave it two thumbs up.
    The trunk comes in gloss black matching my bike perfectly although the paint job is as would be expected...depot carried M8x70 and M8x50 bolts,spacers measured to match were cut at 1 5/8" and around the 2" mark. This gets the trunk relatively level when attached. I placed two sheets of steel under and inside the trunk sandwiching it in order to stiffen the installation. The key point to all of this is that this assembly is removable. That was the attraction to the Harley I owned...detachable backrest. It'll take me about ten minutes to attach or detach, well worth it to have a happier wife on board. Attachment 16250Attachment 16251
    Very nice install!!

  9. #9
    Member tiny0452's Avatar
    Join Date
    Jun 2014
    Location
    kissimmee florida
    Posts
    37
    Quote Originally Posted by d-shark View Post
    Not sure this will help but many rear seat passengers have felt a little uneasy with the Deluxe stock backrest being so low. I installed an adjustable height bracket that the Honda dealership out of Storm Lake Iowa (712) 732-2460 sells and my passenger loves it. I paid $150.00 at the time, not sure what it is now but well worth the money. Might be a much more cost effective solution to make your passenger feel secure.

    My wife was the same way and I too bought the extendable unit from the same dealer and she loves it
    Born to Ride! Check out more of my F6B Trike Pics in my album

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •