Jeff, that is perfect! Thanks a lot.Originally Posted by F6Pilot
I had copied your thumbnails previously and zoomed in on them... but the resolution was too grainy
If you can upload the disassembled fairing as well...
I would need to put the crossovers somewhere else... since I have the cruise control module installed in the right fairing pocket.
I know others on the site are appreciating the larger images too! It gives more detail
21 years Army (retired)
...been everywhere, seen everything, done almost everything.
IBA 80537
No problem Will, I just had to learn the process on Photobucket. The forum software bumps the images down to 20k.
The crossovers are quite large which makes placement difficult. They will fit in the fairing behind the gauges but it will be tight and somewhat difficult to ensure they are secured appropriately. I also was concerned with how open the fairing was and the potential for grime and debris.
I believe I mentioned this before, but I ended up installing the X-overs in an unused space in front. It requires you to remove the windshield and the front fairing. In between the headlights is a space that the x-overs fit vertically - one on each side. This is an old photo when I was still testing the Polks, but the x-over fits nicely here.
Attachment 24987
Here is a photo during a test fitting, prior to placement of the tweeters, as well as a photo showing the mats installed. I will take the bike apart to get photos of the final install. I remember now, I was pushing to get everything installed prior to the rally & bike week. Attachment 2498920160903_162032-01.jpg
Posting Permissions
Reply With Quote