Audio enhancement perma-grin style

[F6Pilot]

Yes, I installed the HSK 130 set.

http://www.hertzaudiovideo.com/car-a...energy-hsk130/

[CoCoKola]

I think Robert, F6Pilot & I all have the HSK 130s.
Mine are still in a box....

10-4 rubber ducky.

Attachment 25242

[Jimmytee]

10-4 rubber ducky.

Attachment 25242

What is the RMS wattage you are running to them?

[F6Pilot]

I chose the following amp for my installation. I am using the OEM stereo and grabbing the preamp speaker outs.

http://www.arcaudio.com/p/ks-125-2-b..._ks-mini?pp=24

[Jimmytee]

I chose the following amp for my installation. I am using the OEM stereo and grabbing the preamp speaker outs.

http://www.arcaudio.com/p/ks-125-2-b..._ks-mini?pp=24

I have been pretty happy with the output of the MVX amp. It pumps out a healthy amount of juice and has been doing so for over 2 years now. It's been powering the Polks which are 2.7 nominal impedance and the JL Audio Sub. Just was trying to remember what Robert was pushing the Hertz with. Contemplating making a change to the Hertz , but they are 4 ohm. Believe I should be just fine though. Contemplated running the NVX bridged to the Hertz and a different amp for the sub, but that would probably not be needed.

For some reason I was thinking that someone had been able to fit the 6.5 Hertz speakers in. I have the Polk 6.5" component speakers but the magnets on the woofers have Neodymium magnets so there is more room for them.

[53driver]

I have been pretty happy with the output of the MVX amp. It pumps out a healthy amount of juice and has been doing so for over 2 years now. It's been powering the Polks which are 2.7 nominal impedance and the JL Audio Sub. Just was trying to remember what Robert was pushing the Hertz with. Contemplating making a change to the Hertz , but they are 4 ohm. Believe I should be just fine though. Contemplated running the NVX bridged to the Hertz and a different amp for the sub, but that would probably not be needed.

For some reason I was thinking that someone had been able to fit the 6.5 Hertz speakers in. I have the Polk 6.5" component speakers but the magnets on the woofers have Neodymium magnets so there is more room for them.

Robert is using the Audison Prima AP8.9
http://www.audison.eu/index.php?page=product&id=50

[F6Pilot]

I don't think you can get the Hertz 6.5 in the stock location. The limiting factors are the baskets and magnets. I have a pair that I was going to attempt installing and they are huge.

[Jimmytee]

Robert is using the Audison Prima AP8.9
http://www.audison.eu/index.php?page=product&id=50

Thanks, I know which amp he is using , but that amp can be used in different configurations. I was trying to remember what configuration. I am pretty sure he was running the woofers and tweeters separately. I am toying with changing speakers to the Hertz. The Audison does look impressive. Don't think I'm there yet. If I was using the stock head unit, it might be different.

[Jimmytee]

I don't think you can get the Hertz 6.5 in the stock location. The limiting factors are the baskets and magnets. I have a pair that I was going to attempt installing and they are huge.

So which ones do you have? The 163 ?

[53driver]

Thanks, I know which amp he is using , but that amp can be used in different configurations. I was trying to remember what configuration. I am pretty sure he was running the woofers and tweeters separately. I am toying with changing speakers to the Hertz. The Audison does look impressive. Don't think I'm there yet. If I was using the stock head unit, it might be different.

Oh, you didn't ask for how he had it configured - you just asked which amp he was using.

He has this amp in bridge, each driver driven independently.
So, assuming 4 Ohm nominal load, 130W per driver.

Cheers,
Steve