The low level from the head unit is usable with a line driver added, or the amp i am using is able to compensate. It is a lower output than its standard, which is why most stock amps will distort quickly.Originally Posted by 53driver
I don't want to have to play with all those gizmos. If I want to do that, I go get my big PA toys out.
However, Rob and you both said that signal coming right off the pre-amp was AFU, so maybe.....
I'm not sure what you mean by play with gizmos. For what it is worth, I can set up the Audison for you, you just need to install it. you can skip removing the f6b amp and just tap that speaker outpyt straight into the Audison.
Then you add 8 14 guage to wire the speakers (you could use the stock for the tweets) and your done. It may be possible to put the amp in the left fairing run power and you bypass 3 hours of taking the bike apart and you keep all your saddlebag space. The amp is small, if someone wants to work with me on their bike at can try to make this work.
Once it's installed, you use f6b like you do today, no gizmos..
Reply With Quote