New LED Badge Rings Video

[53driver]

I'm a little confused Rick...my Amber turn signal lights rings I got from you.... the above post is confusing ! Mine work as described.


http://hondaf6b.com/showthread.php?8...n+signal+rings


#16

Yours are just straight Amber that you got from us. Same as the White except Amber. A lot of people really like the Amber always on and then to Flash when the Turn Signal is turned on. Just depends on the look you want. They look just as good as the White and until recently we sold about the same. Now we seem to be selling a few more White then Amber.

You should have the Eclipze2 Modules (pr), LED Single to Dual Intensity Converters installed.Description: Convert your Single LED's into a Running and Turn Signals. or even Running and Brake.

Convert your single intensity LEDs to Dual Intensity with the advantage of 100% ON Running Lights and a Full Contrast Turn Signal Flash.
Works with any size LED up to 300mA per side. Recommend for All Front Turn Signal Applications and for Red Rear Turn Signal Applications. Eclipze2 will also convert a single intensity LED to Brake and Turn (no running), always giving the priority of Turn over Brake.

We have used the Eclipze2 Modules for several different uses on bikes.

Oh. My. Goodness.
Please do not tell me that Steve did NOT get the "super-deluxe-mongo-Benford 5000 Series" of something.....

[RickW]

Oh. My. Goodness.
Please do not tell me that Steve did NOT get the "super-deluxe-mongo-Benford 5000 Series" of something.....

He is probably going to have to swap them out when the new and improved dual colors are available.

[pilotguy299]

He is probably going to have to swap them out when the new and improved dual colors are available.

Rick,

what is the size of the canam dual color ring compared to the one for the gl1800?

[seventwenty]

He is probably going to have to swap them out when the new and improved dual colors are available.

I have a set of the white, unopened. Will I be able to switch them out and pay the difference when the dual mode are released?

Also, referencing the flasher, my dealer seems to think that it will be unnecessary. I have the Pathfinder switchback running/fog lights also and with the signal switchbacks plus the rings, he says the load would slow the flash. Similar to putting a resistor(?) in???

Do the Pathfinders have a built in flasher? They are LED but don't have the rapid blink pattern.

[RickW]

We will only sell the correct size rings for the GL1800, has to be the correct radius to fit properly.

The foglights with the built in LED Turn signals do not have a flasher built in. They work fine when hooked up in parallel with your stock turn signal bulbs. Everything will fast flash if you go with all LED's for the Turn Signals.

[pilotguy299]

We will only sell the correct size rings for the GL1800, has to be the correct radius to fit properly.

...

They don't fit properly around the Hambly badges. they sit slightly on top of them:

Attachment 24640


that's why I asked.

[RickW]

They don't fit properly around the Hambly badges. they sit slightly on top of them:

Attachment 24640


that's why I asked.

The Rings we have right now that are dual color are about 5mm smaller diameter then the GL1800 Badge Rings. They will not fit properly on the GL1800. The size that we have for the GL1800 are designed for the stock badges, but will work with the after market Badges.

[pilotguy299]

The Rings we have right now that are dual color are about 5mm smaller diameter then the GL1800 Badge Rings. They will not fit properly on the GL1800. The size that we have for the GL1800 are designed for the stock badges, but will work with the after market Badges.

shucks, i was hoping that they were a bit larger.

thank you for the info