He is probably going to have to swap them out when the new and improved dual colors are available.Originally Posted by 53driver
He is probably going to have to swap them out when the new and improved dual colors are available.
Rick,
what is the size of the canam dual color ring compared to the one for the gl1800?
I have a set of the white, unopened. Will I be able to switch them out and pay the difference when the dual mode are released?
Also, referencing the flasher, my dealer seems to think that it will be unnecessary. I have the Pathfinder switchback running/fog lights also and with the signal switchbacks plus the rings, he says the load would slow the flash. Similar to putting a resistor(?) in???
Do the Pathfinders have a built in flasher? They are LED but don't have the rapid blink pattern.
We will only sell the correct size rings for the GL1800, has to be the correct radius to fit properly.
The foglights with the built in LED Turn signals do not have a flasher built in. They work fine when hooked up in parallel with your stock turn signal bulbs. Everything will fast flash if you go with all LED's for the Turn Signals.
They don't fit properly around the Hambly badges. they sit slightly on top of them:
Attachment 24640
that's why I asked.
The Rings we have right now that are dual color are about 5mm smaller diameter then the GL1800 Badge Rings. They will not fit properly on the GL1800. The size that we have for the GL1800 are designed for the stock badges, but will work with the after market Badges.
shucks, i was hoping that they were a bit larger.
thank you for the info
We will get them, we do have to sell down what we have in the straight White and Amber before we can do that though. It is quite a commitment for quantity and money. We do have a very good price on the White and Amber now.shucks, i was hoping that they were a bit larger.
thank you for the info
Posting Permissions
Reply With Quote