Quote Originally Posted by SoCal Rich View Post
So, I was able to see the back of the audio unit and the 24 pin plug and the 20 pin plug. The 24 contains the pre outs to the amp and the 20 contains the outs to the headset cable. So I would intercept the pre outs on the audio unit side and connect them to the headset outputs on the side that leads to the headset plug.
I would be hesitant to do that. For one thing, the pre out signals of the Audio Unit have separate positive and neg/ground wires where the headsets only have a common for both channels. It may work but it also may not or provide an inferior signal.All we have to go by are the wiring diagrams and schematics. I can't say if in the electronics, the ground or negative portion of the pre out signals would be the same electrically as the ground of the headset outputs.
Personally, I think it would be easier to just wire into the pre outs and then run one cable with the 2 RCAs. You mounted your amp in the fairing correct?