My girls:
Isleen - 2014 F6BD
Saorla - 1995 FLSTN Heritage Special
"Politeness, n: The most acceptable hypocrisy."
Ambrose Bierce
Tried posting this three times. Here is the short version: get an amp with a DSP to really get the most out of these speakers. I was running bi-amp 130W RMS @12v to each speaker (left woofer, left tweeter, right woofer, right tweeter.) According to the specs, if you bypass the limiter, you can technically get 170W RMS @ 14.4v per channel but at 10x the THD.
output 1+ & 2- went to the left tweeter, output 3+ and 4- to left woofer. output 5+& 6- to right tweeter, output 7+ and 8- to right woofer.
If you get an amp with DSP, you can skip installing the two crossovers and you get the benefit of each speaker get's its own power. When the kick drum/bass hits, your tweeters can still use full power for the cymbals & that female voice's sexy breathy sounds. If you use a standard two channel amp, it's like you are taking a shower and someone flushes the toilet. The water pressure drops, and you can't wash the soap out of your hair, and the temperature difference is like the crispness of the highs being washed out. That is not 100% accurate but gets the point across. It's a couple hundred more, but it's so worth it. Ask any professional sound installer/ sound engineer. Ask them if they want to run two-way passive or two-way active. Any sound engineers in here who can back me? preferably one who heard my system (that wasn't even dialed in completely.)
Attachment 25248Attachment 25249Attachment 25250Attachment 25251
Some options. Note: I have no experience or opinion of anything but the Audison. Audison is at the same level as these Hertz speakers - competition level. The others, your mileage may vary. Spend the extra couple hundred over the Arc and gain SO much more control, accuracy, etc. For example, I have a controller with two settings, one for when my bike is parked (maximum performance) and one for when I am riding (not as accurate, less bass but more power for volume.)
Audison 8.9
Audison 4.9 (half the power, same DSP)
Match PP82DSP
AudioControl DM-810 (DSP only, no amp Audison makes an alternative as well. This could be added to a 4-channel power amp to give similar capability)
I think if you ask anyone who has heard my system, including you, it's not really lacking. There were some audible differences. If I were to describe it I would say yours had a little richer sound, but I certainly wouldn't say it was a glaring difference.
I understand where you are on the Audison and it seems to be an awesome tool and piece. No argument there. Remember, however, you're dealing with a different set up with the source. I'd argue that you have more to compensate for with the OEM "head" unit as the source.
Typically, most audio enthusiasts would find little argument in that one of the biggest things to affect sound reproduction is the component at the end of the chain. The component that has to convert electrical signals into the sound waves we hear. That's why I'm considering changing speakers. Who knows, I may look into DSP in the future, but right now it's kind of hard to justify the expense. I even found myself going over to my bike and jamming a bit on the stereo trying to find fault to justify replacing the speakers. It would help if one of them would just blow.
I am also looking at another possible change, but I'll keep that under my hat for now.
"Go sell crazy somewhere else, we're all stocked up"
I purchased mine through Amazon. Here is a link.
https://www.amazon.com/HSK-HI-ENERGY...ywords=hsk+130
Jimmy, wasn't directed at you. My professional opinion was for someone who hasn't bought an amp, and who also may not want to give up room for a subwoofer.
The reality is if someone wants to keep their factory controls for audio, they need the dsp to make up for the what you solved with a alternate head unit. Agreed? You can make it sound great without, as proven above, not absolute.
I measured 130+ db at my speakers without noticeable distortion. I would put a major prize bet that can't be done without active setup.
Ok, I misunderstood then.
I don't remember exactly what the db measurement was. I did it a while back. I also did comparative db measurements with the original speakers and system and after the amp and speakers were changed. This was when I was still using the factory head unit. What I remember was how dramatic the difference was.
"Go sell crazy somewhere else, we're all stocked up"