I have done the 1000/24 a couple of times. Havent decided if I'll do it again. First time took me 25 hours so no joy. Second time 22 hours and I have the certificates and the stuff you get for completing it. Advice I can give.Keep your pace up.I dont mean excessive speed but keep rolling.Get plenty of rest before you go. Stop and eat.Stay hydrated-not coffee-you will lose time stopping to pee.To the point of this thread DONT use gear that annoys you. Get a helmet that fits ,clothing and boots. For me it was a challenge and grueling. I met the challenge but a helmet that hurts -no way...
The old maxim when buying helmets. "You have a Shoei or Arai shaped head" is close to the mark. If you have a Shoei head a Kabuto will fit fine.
In my research I understood the neo tech to have excellent airflow / cooling. I don't own one yet but I'll most likely be buying one very soon. Can you adjust the top vent in a way to work for you? If that doesn't work I do have a non-helmet suggestion for you. Keep a well soaked linen towel wrapped around your neck as often as you can. All the best on your ride.
From a review
"The top vent on the Neotec is a simple slider. Push it back, through one or two clicks, and it opens.Fresh air pours through the helmet -- what can only be called a "curtain" of air flows through over the top of the head. No need for multiple switches, buttons and exotic spoilers, assemblies and plastic gimcracks. Just make the darn thing flow some air, and this one does! Maybe it takes big bucks to design a system that actually works? Doubtful. Instead, it's more likely that a smart designer who actually rides a motorcycle can figure this out. Apparently Shoei has one, because the Neotec has what has to be the best ventilation in a flip-up helmet you'll find (let's hope we find one that's better!) and it beats, oh, maybe 98% of the full-face designs also."
I'm a retired Army pilot and we used a Nomex skullcap. I use a commercial one of these now ALL the time I use my helmet. Does a great job eliminating hot spot and absorbs sweat.
Exactly the same spot. Wearing a helmet like that for a 2 week ride certainly made the ride less enjoyable. Some mornings it was tough to even put the thing on. I tried pounding the styrofoam in but it didn't help much. The Signet Q (or X for my next one) is the only helmet for me.
Was going to make a similar suggestion. Perhaps try a skullcap (or do-rag) that has flat lock stitching to minimize effect of the joints in the fabric seams. I wear one of these Cortech liners and it works great. If you have a cloth do-rag with prominent seams stitched together it can create a seriously painful hot spot.
http://www.cortech.net/inc/sdetail/j...dliner/166/558
Maybe a question of definition. My interpretation of 'hot spot' was the place that your helmet and skull maintain an interference clearance. Meaning the helmet is too small. It starts as a hot feeling at the point of contact and grows to an intolerable pain.