It is from Wingstuff and it does fit the F6B. If you have the Deluxe model F6B it is plug and play, as long as you buy the accessory cable splitter that connects under the left side of the fairing (under the left storage box). You have to route the cable over to the right and then you can plug it in. Wingstuff has that cable as well...Originally Posted by motornerd
http://wingstuff.com/products/29328-...essory-harness
I believe that if you do not have the Deluxe model, you can connect directly to the connector on the right side that would be normally used by the heated grips switch.
You also can not see this in my pictures that you found, but when you are installing that Voltmeter, you will see that the threaded positive terminal on the back of it comes dangerously close to contacting the radiator. So just get one of those wire terminal connection twist plugs (the kind you use when your're connecting house wires together) and twist it on to the threaded terminal in order to keep it insulated from the radiator.
Reply With Quote