Am about to add LED lights to
Results 1 to 4 of 4

Thread: Am about to add LED lights to

  1. #1
    Senior Member shortleg0521's Avatar
    Join Date
    Sep 2014
    Location
    fredrick. maryland
    Posts
    1,216

    Am about to add LED lights to

    Replace the reflectors on the covers that on the brake calipers.
    I am guessing that all is needed is replace them then run
    wires up to mirror connections with adapters. Am I right on this?

  2. #2
    Senior Member 2wheelsforme's Avatar
    Join Date
    Dec 2016
    Location
    Gulf Breeze, Florida
    Posts
    1,444
    Turn reflectors into lights, I would think power is all you need. http://wingstuff.com/products/34934-...electrical-f6b

  3. #3
    Senior Member olegoat345's Avatar
    Join Date
    Nov 2016
    Location
    Central, Fl.
    Posts
    1,234
    Kury makes a set for the wing. Mine came w/ them. The R. burned out, signals went wacky. I found a bad Kury adapter / connector in the mirror wiring. The previous owner zip tied the wires to the brake hoses, followed them up into the cowling. Don't know where else you could put them, It looks good. If somebody else makes them, check 'em out & please let me know.

  4. #4
    Supporting Vendor, Admin RickW's Avatar
    Join Date
    Nov 2013
    Location
    Madison, OH
    Posts
    877
    I started out with the Kuryakyn LED Reflector Conversions. They work great and look good.
    Took them of when the Lighted LED Fork Covers came out from Add On Accessories.
    Those look and work great also.


    The only thing you really have to do when installing either is put a quick disconnect in the line so it can be unplugged locally. I have a link to a couple that we use. Running the wires neatly with the hydraulic lines is the way to go.
    http://store.valueaccessories.net/Ch...ersGL1800.aspx
    http://store.valueaccessories.net/Ba...onnectors.aspx

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •