Oh, and BTW, SpencerPJ, that photo shows the old filter condition, for reference. That one was in use just under 10K miles.
Here is a link to the write-up I did when I replaced my Camshaft Position Sensor
http://hondaf6b.com/showthread.php?1...or-Replacement
The only hard part is accessing/removing the disconnect (red plug), expect full use of vocabulary on this step
taxfree4 - Yep that is the one. You'll also need 11524-MCA-010, which is the gasket for the front cover.
Willl's write-up is excellent, btw. He's right...getting to the plug is a pain if you're doing it all from the front, BUT if you're already doing the air filter, the plug is right there and easy to get to.
Some folks doing it as-needed (i.e. a roadside fix) have reported just cutting the wires and crimping or soldering versus using the factory plug.
Into the Hellhole and back
https://youtube.com/shorts/Q8HTI0D1tr4?feature=share
Next, Crank position sensor
Equitare solum equitare amplius
Woohoo! You're halfway there!
The filter looks like it served well. It's time.
Crankshaft Position Sensor is done, did that and the air filter today, 9 hours, only because I had to wait for UPS to deliver the parts.
https://youtube.com/shorts/KlFEcXTyGO8?feature=share
Equitare solum equitare amplius