Mounting GPS Suggestions
Results 1 to 9 of 9

Thread: Mounting GPS Suggestions

  1. #1
    Senior Member fxdl2051's Avatar
    Join Date
    Apr 2014
    Location
    Issaquah WA
    Posts
    447

    Mounting GPS Suggestions

    I have a Garmin Zumo 550, any suggestions as to a good mounting site and mounting hardware. I've been using Ram Mounts on my tubular handlebar bikes, but things are different here. I suspect I'll have to find a power point of some kind for it too. Thanks good people.
    ss^,
    Ken

  2. #2
    Member
    Join Date
    Jun 2013
    Location
    Schenectady,NY
    Posts
    89

    zumo 550

    Had one on my vtx 1800, mounted to the f6b on clutch side using ram ball that mounts to the clutch lever mounting bolts. Got the power from under the left pocket, hardwired into the accessory/lighter plug that is under there. Get the 12 volt outlet before you do the tap in, and kill 2 birds w/one stone. I ran the hard wire up through the channel under the bars and terminated them into a battery tender pigtail w/weather cap. Put matching end on zumo wiring so I can remove everything but the ram ball when not using gps. Jim

  3. #3
    Senior Member fxdl2051's Avatar
    Join Date
    Apr 2014
    Location
    Issaquah WA
    Posts
    447
    Sounds like a plan, thanks much.

  4. #4
    Senior Member Texas TC's Avatar
    Join Date
    May 2013
    Location
    Corinth, Texas
    Posts
    687
    I also use RAM mount. I power with a spiral expandable cord from the storage box 12v outlet I installed. I have double ball mount on left handlebar and single ball on the right.

    image.jpg
    [SIGPIC][/SIGPIC]

  5. #5
    DarkSider#1617 Steve 0080's Avatar
    Join Date
    Dec 2012
    Location
    Sanford,FLA
    Posts
    8,079
    me too.....
    Attached Images Attached Images
    " Truth is often deemed rude, blunt and to the point which is why so few make their friend " Freddy Hayler ..352-267-1553 Sanford, FLA Gutterman6000@Gmail.com

  6. #6
    Senior Member
    Join Date
    May 2014
    Location
    Fuquay Varina, NC
    Posts
    428
    I did this today....mounted my Garmin 52 to a Ram mount using the right brake cylinder. I did that because eventually my J&M handlebar mount is going on the left clutch cylinder. Hope to post a pick tomorrow. Haven't set up the wiring yet but I have an idea I think might work.

  7. #7
    Senior Member motozeke's Avatar
    Join Date
    Sep 2013
    Location
    Huntington Beach, CA USA
    Posts
    486
    I like the X-Grip mount. It will accommodate your cell phone or GPS units of various sizes. Think of it as giving you options. I've used GPS units and my Android phone in mine, also works for iPhone. Or just about whatever.

    https://www.youtube.com/watch?v=STDzvGsXVc8

  8. #8
    Member
    Join Date
    Apr 2014
    Location
    Murfreesboro, TN
    Posts
    38
    Another option is to mount it to the side of the center console (where the key is). I mounted my Garmin Nuvi on the left side with a RAM mount (I made sure the GPS was not too wide to clear the handlebar when turning). I like that is relatively centered and independent of the handlebars.
    Just the mount:
    Attachment 5882

    And with the GPS attached:
    Attachment 5883

  9. #9
    Senior Member
    Join Date
    May 2014
    Location
    Fuquay Varina, NC
    Posts
    428
    This is where I mounted mine.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •