What did you do to your F6B today?

[Engelbrau]

Added carpet for the bags, smoked signal lenses, foot pegs, mini floor boards, and rear luggage rack.

...the rest of the photos:

What brand are those forward pegs? They're cool.

[Phantom]

What brand are those forward pegs? They're cool.

http://www.rivcoproducts.com/products/home.php?cat=441

[shooter]

Got my smoked turn signals in this week and done little chrome pieces on the fender vents and chrome grilles on the side marker and rear reflector. Everything went OK except the signals I offered from Wingstuff didn't come with the foam. Had to buy some and cut it down.

[fxdl2051]

Played "Where do I mount the action cam?" with the f6 this week.

[C'Ville]

Got the seat, side covers, radio controls removed, plan to work an hour or so a day after work this week, then try and wrap it up on Saturday !!

[bigbird]

Got every piece of plastic reinstalled and all additions/mods completed. I ended up with 21 changes to my bike since last Fall. Just waiting for some warmer weather to fire it up, calibrate the digital gear readout, and go for a ride. The streets are bare and dry, snow is all gone, but it's just damn cold.

[srt8-in-largo]

12,000 mile maintenance (last weekend).

A top tip for Wheeler Dealer fans, as you unbolt all the plastic, put the bolts back into the holes they came out of until you're ready for re-assembly. There's quite a few different sizes that can be easily mixed up.

My air cleaner looked fairly decent... I'll do one more at a 12,000 mile interval, but may bump up to 24,000.

[Big Jay]

Removed the seat so It can be shipped to Russell Daylong tomorrow.

[cwjj2001]

Last week during the Daytona rally I had the chance to meet the guys from SoCal Lighting. These guys were very informative and they really appreciate our forum. I picked up a set of the Red LED tail lights because I already have SoCal HIDs, and the LED High Beam lights which I posted pictures of in the past. With the help from the three amigos Todd (fire tech), Steve (the guy in the pictures with the old man socks), and Steve's guest I was able to install the tail lights. No, it did not take four of us to install the lights but whenever you make improvements to something we have a passion for everyone wants to jump in. I took three pictures, a before an after and the with the brakes on. These lights are very bright in person especially with the brakes on!!!

If you have any questions just send me an email!!!
Attachment 12494Attachment 12495Attachment 12496

[baiao]

Hello Big Jay
Keep us posted on the seat mod from Russell Daylong.
Thank you