Quote Originally Posted by opas ride View Post
What is involved to "re-seat" and how do you do this on the front axle..Just curious, thanks....
Loosen the front fork pinch bolts. Install and align the Super Brace with the top fork tubes; and tighten it's screws to 10 ft lbs.

Then...

Get on the bike and bounce the front end a couple of times. Get off the bike and re-tighten the front fork pinch bolts to 16 ft lbs.

What this does is makes sure that the bottom of the fork tubes are not "cock eyed" on the axle. They will move in a natural, unbinded position on the axle. I did scrutinize the axle closely before I installed the Super Brace and the axle didn't need any adjustment after the fact. But you should do it anyway, just in case it needs it