? For the ones that have added tourpacks.

[Pap]

Any pics of install process would help .Guess I'm a visual person. Thanks for all the responses.

This is my set-up.I needed to use spacers on the top of the plate for the tour pack.
Underneath, you see the pipe nipples are epoxy puttied onto the plate to aid in the installation. Trying to remember, I believe the nipples are 2" on the front and 2-1/2" on the rear.
I sprayed everything with a can of bed liner.
Hope this helps.

[DC1503]

This is my set-up.I needed to use spacers on the top of the plate for the tour pack.
Underneath, you see the pipe nipples are epoxy puttied onto the plate to aid in the installation. Trying to remember, I believe the nipples are 2" on the front and 2-1/2" on the rear.
I sprayed everything with a can of bed liner.
Hope this helps.

Thanks ! That does help. looks like a pretty easy setup.

[dickiedeals]

This is my set-up.I needed to use spacers on the top of the plate for the tour pack.
Underneath, you see the pipe nipples are epoxy puttied onto the plate to aid in the installation. Trying to remember, I believe the nipples are 2" on the front and 2-1/2" on the rear.
I sprayed everything with a can of bed liner.
Hope this helps.

Nice photo. I cut the threads off my spacers. I wish I had a welder to weld the spacers to the plate. Would be much easier to take on and off for sure. I also put an Aluminum plate inside the box made out of an old speed sign for stability but it interfered with radio reception.(I listen to the radio). When removed I regained reception.. Large fender washers work as good......................Dickie

[flat6bagger]

Here you go anyone wanting to do a trunk.
Here is a cheap alternative that if you screwed up the install you wouldn't be out much money.

http://www.amazon.com/TMS-TBOX-JK100.../dp/B00513G82U

Doug

[Blotar]

Thanks for the link Doug,
I ordered one for myself and this should help me take long trips without all those bags of stuff that I dont need.
Blotar