I use a Ram X-Grip mounted where the logo previously resided below the switch.
IMG_5347.jpgIMG_5350.jpg
I use a Ram X-Grip mounted where the logo previously resided below the switch.
IMG_5347.jpgIMG_5350.jpg
How does one get the piece off to mount the ram ball?Originally Posted by F6Pilot
2014 Red F6B with ABS
Baker: Hand Wings, BikeMP3: rack, Cardo Packtalk Bold Cyclepump: air compressor, Garmin Zumo 396
Honda: battery maintainer, center stand, passenger backrest, shop manual (2012-16), tall screen
MEC: first aid kit Nelson Rigg: Route 1 Traveler Tour Trunk Bag
Rivco: Honda Adjustable Highway Mounts, Flatfoot pegs
Uclear: HBC200 intercom system (spares)
ZUMOLOCK to lock on Zumo 396
......................................................................
You have to pull the plastic. I've got photos squirreled away somewhere. Let me find them.
Here are the pics. I believe I just pulled up on the piece around the ignition switch. Steps should be in the manual and it was real simple. Popped off the GW logo, made a backing plate, and mounted the ball.
IMG_5350.jpgIMG_5347.jpgIMG_5343.jpgIMG_5342.jpgIMG_5341.jpg
Last edited by F6Pilot; 08-02-2023 at 08:09 PM.
I also ride with the Quad mount, Ive had the Ram X mount but it broke over time. the Quad lock doesn't move much at all, just get the dampener when you buy
Posting Permissions
Reply With Quote