Quote Originally Posted by Delta View Post
Thanks for posting this info. Where did you locate the Smart Triple Play? Did it come with posi taps or did you have to buy them separately? I was leaning towards SoCalMotoGear's setup; but, I like the idea of 4 LEDS lit up all the time for the rear.

Was Custom Dynamics wire color codes accurate for the F6B?
Nice write up.
I actually bought mine on ebay from a custom dynamics authorized dealer but you can order directly from them with no problem also. I did get the posi-tap and posi-lock that I need to complete the install which makes it pretty easy for sure even if your not that good at electrical stuff.

The color codes are spot on, I actually connected mine to the harness when the tail light comes out of the bike so that if I wanted to change the settings I could by just removing the tail light instead of taking off the hand rails and seat. I also could have mounted it somewhere under the right side or left side cover but I was unsure if I could get to the necessary wires from there.

The only deviation from the instructions was to connect the blue and orange wires coming from the triple play to the wire that powers the 12V accessory socket when the bike is turned on. The triple play needs to see 12 volts for these 2 wires and because of the canbus system you can get that from the running lights like the instructions say.

Grant