PDA

View Full Version : I NEED HELP!!



phunter32
03-02-2017, 06:33 PM
I am trying to install my cellphone holder with usb and I want to try and connect it in the same area as the auxiliary. I need an positive and negative connection. Can someone help me figure where the best spot I can put it? Thanks in advance.

ReserveBum
03-02-2017, 07:16 PM
under the left cubby, there is an open aux power connector. You can get a "Y" cable that splits into two. Then you can use one for a cig lighter or usb power plug and on the other one either cut & solder the two wires or you can get and make a connector to fit. You can also go all the way down to the fuse box by the battery and wire it to existing terminals

F6B1911
03-02-2017, 09:15 PM
under the left cubby, there is an open aux power connector. You can get a "Y" cable that splits into two. .....I've been looking for a Y cable that plugs into the RED connector under the left cubby..... Do you have a source for that?

Sorcerer
03-02-2017, 10:44 PM
I think Kury makes one.

53driver
03-03-2017, 08:57 AM
under the left cubby, there is an open aux power connector. You can get a "Y" cable that splits into two. Then you can use one for a cig lighter or usb power plug and on the other one either cut & solder the two wires or you can get and make a connector to fit. You can also go all the way down to the fuse box by the battery and wire it to existing terminals


I've been looking for a Y cable that plugs into the RED connector under the left cubby..... Do you have a source for that?


I think Kury makes one.

http://wingstuff.com/shop/?keyword=accessory+harness

Cheers,
Steve

ReserveBum
03-04-2017, 08:53 AM
http://wingstuff.com/shop/?keyword=accessory+harness

Cheers,
Steve

Steve
I looked there and also at EC but I couldnt find it. I got mine a few years ago and dont remember where and I have been looking at multiple sites but I havent found one yet

pilotguy299
03-04-2017, 11:38 AM
http://store.valueaccessories.net/KuryakynAdapterPlugsFrontTurnSignalAccentsHondaGL1 80006andF6.aspx