PDA

View Full Version : Two Brothers Mufflers on and let's go for a ride with the GoPro


taxfree4
05-06-2017, 05:51 PM
Low deep rumble at idle, full rumble at throttle these are the shit.

I've got Barry White stuck in my mufflers


https://youtu.be/HepKef_BalA
Walcrow
05-06-2017, 08:45 PM
Yes they are!! Sound perfect and didn't notice any DRONE crap at speed. Nice job :clap2::clap2::yes:
opas ride
05-06-2017, 10:13 PM
Low deep rumble at idle, full rumble at throttle these are the shit.

I've got Barry White stuck in my mufflers


https://youtu.be/HepKef_BalA

Sound pretty nice on the Video..Notice any of the "infamous drone" at speeds??...I have some slight drone with the Cobra's on my bike, but nothing major or disturbing for me...Ride safe
taxfree4
05-07-2017, 02:05 AM
Sound pretty nice on the Video..Notice any of the "infamous drone" at speeds??...I have some slight drone with the Cobra's on my bike, but nothing major or disturbing for me...Ride safe

Negative, just a low rumble at idle that increases and broadens out as you add throttle. Unlike the Vance and Hines I put on my Harleys which were just loud these are more of a concentrated power at a lower volume.
willtill
05-07-2017, 07:54 AM
My Gawd those sound AWESOME :shhh:

Man... I don't want to install Torque loops but I really would like to get those TBR's.... you think the same sound would be emitted sans Torque Loops?

PS: Nice review you left on the TBR website Mike. :yes:
speedjunkie
05-07-2017, 09:13 AM
Look and sound great! I don't think you can put any muff on that won't sound better with the loopz installed. I installed the 6-2-6 and sounded pretty good, but had to leave all the baffles in to lessen the drone, cause it was much worse with baffles removed. After installing the loopz, the drone is gone, but I have more sound with the baffles in than I did with 4 baffles out before the loopz.




Mike
BIGLRY
05-07-2017, 11:51 AM
Low deep rumble at idle, full rumble at throttle these are the shit.

I've got Barry White stuck in my mufflers


https://youtu.be/HepKef_BalA
Yea let the music play:yes:

http://streamd.hitparade.ch/cdimages/barry_white-let_the_music_play_s_1.jpg
taxfree4
05-07-2017, 02:32 PM
Yea let the music play:yes:

http://streamd.hitparade.ch/cdimages/barry_white-let_the_music_play_s_1.jpg

Never fails, Larry comes out with a beauty. You know I have to make a video of Barry and the exhaust together.
taxfree4
05-07-2017, 02:35 PM
My Gawd those sound AWESOME :shhh:

Man... I don't want to install Torque loops but I really would like to get those TBR's.... you think the same sound would be emitted sans Torque Loops?

PS: Nice review you left on the TBR website Mike. :yes:

What have you got to lose, if you blow for the exhaust and it doesn't sound right buy the Loopz and bring them to the rally, you'll have a bunch of people chipping in to put them on. I've been on the wagon since September
so I can at least hold a wrench.
willtill
05-07-2017, 03:18 PM
Mike, you attained those directly from TBR with a discount? Is there a code?
taxfree4
05-07-2017, 04:00 PM
Mike, you attained those directly from TBR with a discount? Is there a code?

https://www.revzilla.com/motorcycle/two-brothers-slip-on-exhaust-honda-gold-wing-f6b
shortleg0521
05-07-2017, 10:01 PM
https://www.revzilla.com/motorcycle/two-brothers-slip-on-exhaust-honda-gold-wing-f6b

Mike my brother, I think you came from the right direction on this one.
The business point of view and the quality point of view.
I know the old Valkyrie sounded really good with the two brothers and did not loose power because
of them.
Looks to me that these are the same deal for our F6Bs
Thanks for your work Brother.
taxfree4
05-08-2017, 12:48 AM
Mike my brother, I think you came from the right direction on this one.
The business point of view and the quality point of view.
I know the old Valkyrie sounded really good with the two brothers and did not loose power because
of them.
Looks to me that these are the same deal for our F6Bs
Thanks for your work Brother.

I was definitely impressed with the quality of the material and workmanship on these puppies. All things equal, money-wise, I still would have went for them over the Torq Master because of the information available regarding ingredients and reviews. I really need to get it on the highway and give them a kick in the pants.
Redlinez
05-08-2017, 04:40 PM
Sounds interestingly good! Was that blood under the pipe?
taxfree4
05-08-2017, 04:52 PM
Sounds interestingly good! Was that blood under the pipe?

Red paint
Jupiterider
05-09-2017, 02:48 PM
I put on the Two Brothers exhaust on my F6B. They are very well engineered, designed and I am thoroughly enjoying the sound of my bike!
The drone is not an issue for me. I've had plenty of other bikes with much louder exhausts. This is my fourth exhaust system from TB in as many bikes and I have yet to be disappointed....:clap2:
willtill
05-09-2017, 03:29 PM
I put on the Two Brothers exhaust on my F6B. They are very well engineered, designed and I am thoroughly enjoying the sound of my bike!
The drone is not an issue for me. I've had plenty of other bikes with much louder exhausts. This is my fourth exhaust system from TB in as many bikes and I have yet to be disappointed....:clap2:

Did you install Torque Loops as well? Or just slip them on with the OEM cats and crossover still in place?
willtill
05-09-2017, 03:30 PM
Mike!

We need a "drive by" video with sound of those TBR's.... coming and going. :yes:
taxfree4
05-10-2017, 08:29 AM
Mike!

We need a "drive by" video with sound of those TBR's.... coming and going. :yes:ķ

I'll do it today, I've got Floyd Bennett Air Field 5 minutes away consider it done. One more Gunsmoke and I'm on it. Is it me or am I the only one that likes the B/W one hour Gunsmoke better than the color. BTW, Festus is my all time favorite.
taxfree4
05-10-2017, 03:34 PM
Driving by slow, fast and faster



https://m.youtube.com/watch?v=xIWs1_hwB4k
willtill
05-10-2017, 08:15 PM
Driving by slow, fast and faster

https://m.youtube.com/watch?v=xIWs1_hwB4k

Sounds very nice! :yes: Thanks for taking the time to take a video of it; I was really curious how it sounded coming and going.
taxfree4
05-10-2017, 08:19 PM
Sounds very nice! :yes: Thanks for taking the time to take a video of it; I was really curious how it sounded coming and going.

Like I need an excuse to take a motorcycle video.
Walcrow
05-11-2017, 12:45 PM
Hey Barry White.............

When do we get another video? I've watched the latest one at the airstrip 62 times!!
taxfree4
05-11-2017, 12:51 PM
Hey Barry White.............

When do we get another video? I've watched the latest one at the airstrip 62 times!!

I didn't want to overkill it being I had 4 up already but I'm taking requests.
willtill
05-11-2017, 01:12 PM
I downloaded that Barry White tune on my Ipod... :icon_mrgreen:
taxfree4
05-11-2017, 01:29 PM
I downloaded that Barry White tune on my Ipod... :icon_mrgreen:

We used to call him the "leg opener" put on that and give a girl half a quaalude you were getting ass.

Teddy Pendergrass too but the ultimate was "In Memory of Elizabeth Reed" from the Fillmore, you didn't even need a lude for that.
broncsrule21
05-11-2017, 05:10 PM
also known as panty dropper'gw-smiley'
Jupiterider
05-12-2017, 10:27 AM
Did you install Torque Loops as well? Or just slip them on with the OEM cats and crossover still in place?


No Torq Loops yet. I'm pretty happy with the results so far. Maybe I'll change my mind when I personally listen to another bike with both of them installed. From the perspective of "green filtered" glasses, I should also mention the environmentalist in me is feeling pretty guilt free about keeping the cats.
willtill
05-12-2017, 10:46 AM
No Torq Loops yet. I'm pretty happy with the results so far. Maybe I'll change my mind when I personally listen to another bike with both of them installed. From the perspective of "green filtered" glasses, I should also mention the environmentalist in me is feeling pretty guilt free about keeping the cats.

That's what I wanted to hear. :yes:

Like I've stated before, I am mechanically inclined but really don't want to fool with yanking off the pipes. One thing that concerns me is that it does not appear that new crush gaskets are being used for the pipes where they attach to the heads after installation (need 6 of them - item #3 below).

http://i68.tinypic.com/2dgw4ko.jpg
Jupiterider
05-12-2017, 02:33 PM
That's what I wanted to hear. :yes:

Like I've stated before, I am mechanically inclined but really don't want to fool with yanking off the pipes. One thing that concerns me is that it does not appear that new crush gaskets are being used for the pipes where they attach to the heads after installation (need 6 of them - item #3 below).

http://i68.tinypic.com/2dgw4ko.jpg

Glad I could help...:yes: