Rear brake and turn switchbacks

[AWILLIAMS64]

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F23 2619335917

Anyone tried these?

[shortleg0521]

I have not used those blubs, but have some like them doing brake and signals

[seventwenty]

You will need to get some "y" adapters or splice in to your current wiring to work as advertised.

[shortleg0521]

Easiest way is replace the lamp sockets with double contact.
That way you just need to run a brake wire.
look on you tube for info, one of the ladies here put up the info.

[olegoat345]

I thought there was a bulb swap, using the OEM sockets...………….. Check LED run, turn, brake bulbs on ebay

[53driver]

I did the mod per the video.
Actually I ran them first as red running lights - on all the time - but my brake light effectiveness was diminished.
So I went back to her configuration where there is no light except for when signaling and braking.
Much betterer.
Cheers,
Steve

[JackB]

I did the mod per the video.
Actually I ran them first as red running lights - on all the time - but my brake light effectiveness was diminished.
So I went back to her configuration where there is no light except for when signaling and braking.
Much betterer.
Cheers,
Steve
I did the same. Brakes lights are bright