View Full Version : F6B Mad$stad - will it fit full Wing?
VStarRider
07-03-2019, 06:12 AM
The stock full Wing windscreen leaves a lot to be desired compared to the Angrystad. Thinking about pulling it from F6B and putting it on ‘16 Wing and wondering if it will fit. If so, I would probably order a 13” screen to account for the higher seat height of the full Wing.
BigMac
07-03-2019, 09:52 AM
Yes I believe they will. But you could always give them a call to make sure.
Verismo
07-03-2019, 01:02 PM
Seems like it ought to, but I'm not sure. You might have to adjust the bolts on the rails a little, to accommodate the shorter inner shield, though. Let us know if it works out.
Jason
rdbonds
07-03-2019, 02:05 PM
Mounting holes for the base shield are a bit different, since the full wing has the sliding/adjustable mount. When I've purchased full wing shields to use on my F6b, I've had to re-drill them to match the F6b bolt pattern. Not that it won't physically fit...you'll just have to drill to modify it. I have a Clearview full wing shield that I modified that's not currently on the bike that I can grab a photo of if you like...just don't make fun of my janky drilling. :)
rdbonds
07-03-2019, 02:18 PM
Here's the photo for comparison. The five slots are original, and there for the full wing. I drilled the three holes higher up to make it fit the F6b. The extra set of 3 holes were a test I did to see if I wanted to run it ~3/4" higher up. Hope that helps.
6551
DMAGOLDRDR
07-03-2019, 07:29 PM
YES it will fit. I took my ------- off my F6B and put it on my 2015 Wing. No problems at all, but you will NOT have the height adjustment for the base shield just like the F6B.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.