PDA

View Full Version : Honda name plate on motor installantion



MidLifef6b
11-02-2020, 07:12 AM
The previous owner de-badged the bike. I would like to put the Honda name plate back on the motor. It the long u looking name plate. It looks like it was glued on (not sure)? and has some rubber/foam end pieces that adhere to the ends. Couldn't find any info how to install these. Any suggestions? Thanks,

SeaSteve
11-02-2020, 10:21 AM
I got a real cheap deal on a set of RED 2015 40th Anniversary badges. On my 2016 F6B they're held in place by double stick tape. If I remember correctly the bolts don't actually touch the plastic Honda badges.

I still have the original silver/chrome badges which you can have for shipping cost + $5. Send me a PM if you're interested.

MidLifef6b
11-02-2020, 11:35 AM
Yes I have the original ones.......but thanks! Double stick tape sounds correct.........and yes the bolts don't hold the name plate down. Wonder what kind of tape?? because of the engine heat not sure what to use.......may have to go to auto shop.

BIGLRY
11-02-2020, 01:28 PM
This is what is used in the automotive industry 3M™ VHB™ Tape and what I recommend and have used https://www.amazon.com/3M-Tape-0-125-width-length/dp/B00HLY50P8/ref=asc_df_B00HLY50P8/?tag=hyprod-20&linkCode=df0&hvadid=167151899683&hvpos=&hvnetw=g&hvrand=17924424511690382751&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9031735&hvtargid=pla-316336334835&psc=1
3M VHB adhesive tape offers quickly bonded finishing trims and moldings in automobiles, equipment, and heavy-duty vehicles. This mounting tape can be used in place of rivets, screws, spot welds or liquid adhesives
High Resistance: foam core adhesive tape is highly resistant to moisture, solvents, UV light, chemicals, and high–low temperature cycling from -35C to 110C degrees. The permanent bonding tape ensures stronger sealing even in extreme environments.

MidLifef6b
11-03-2020, 10:20 AM
Thanks!