Stock Windshield Height

[Tourer]

Could someone tell me the height of the stock windshield on a 2013? From the bottom of the sealing gasket on the fairing to the top of the shield. I have done some searches on this forum and Google, but no mention of this measurement. Mine has a 16 1/2” shield with a vent which is okay for winter but too tall and hot for the 90s we experience here in the Carolinas. So would like to find a lower shield and wanted to know this stock measurement. Thanks.

[JackB]

I have a stock windshield that I would sell.
Make me an offer

[seventwenty]

Stock height is approx 6” on an F6b if I remember right. You’ll take a lot of wind and bugs to the face if you’re not wearing a helmet.

[98valk]

Go with Madstad instead. It is like having 3 windshields in one, with a huge adjustable cooling vent.
Phantom may still have one for sale. That is where I got mine.

[F6Dave]

I've had a 2013 and a 2016. The stock windshields were slightly different on both. I need to dig them out to be sure but I think the 2016 was a bit taller. It also may have different graphics.

[Txbluelacy]

I have a 2013 and will check tonight if someone else hasn’t by then.

[SeaSteve]

I "LOVE" my Baggershield Adjustable (https://www.baggershield.com/product/baggershield-honda-f6b-11-to-19-adjustable/) windshield for the exact problem you're wanting to fix. First, I'm 6'3" with an Ultimate King seat. At full the full 19" height I'm protected on the highway and stay warmer out the wind in winter. At the lower 12" height I get a comfortable amount of wind in my face which goes down my face and chest to cool me in summer.

[OlyF6B]

FWIW... 6", 7", etc. any stock shield height in that range certainliy looks cool... but doesn't afford much in the way of protection, especially if one is going to go long rides at higher speeds. I went with a dark smoke, 14" flared Klockwerks shield. I'm 5'10" and only get a small amount of helmet buffeting when at 60+ mph.

8037

[jm21ddd15]

I "LOVE" my Baggershield Adjustable (https://www.baggershield.com/product/baggershield-honda-f6b-11-to-19-adjustable/) windshield for the exact problem you're wanting to fix. First, I'm 6'3" with an Ultimate King seat. At full the full 19" height I'm protected on the highway and stay warmer out the wind in winter. At the lower 12" height I get a comfortable amount of wind in my face which goes down my face and chest to cool me in summer.

i loved my Baggersheild too, but thought there was better. went to the Madstad. Much better!

[tenxxx]

+1 on the MadStad

[SeaSteve]

The other think I love about the Baggershield is how it looks when the clear extension is down behind the dark smoked base shield. I'm not so much into the look of the M--Stad with it's supports and rails.

[F6Dave]

FWIW... 6", 7", etc. any stock shield height in that range certainliy looks cool... but doesn't afford much in the way of protection, especially if one is going to go long rides at higher speeds. I went with a dark smoke, 14" flared Klockwerks shield. I'm 5'10" and only get a small amount of helmet buffeting when at 60+ mph.

8037
The Klockwerks is pricey, but the protection is surprisingly good for the height. The curve at the top must help a lot. It's also the best looking shield you can buy.

http://dchealy.com/valk/kw1.jpg

[OlyF6B]

The Klockwerks is pricey, but the protection is surprisingly good for the height. The curve at the top must help a lot. It's also the best looking shield you can buy.

Yup... I too think it a great mix of protection and style...

8042

[Sorcerer]

I went from the Bagger Shield without the flip up to a 14” klockwerks. I was able to back the radio volume down to 15 with AVC set at medium. Took away almost all the buffeting. I do catch bugs and other debris in the face from time to time.

[woody]

Tourer in answer to your question vertical from bottom of seal to top of the screen is 5". Along the the angle of the screen it is 7.5".The wind off the screen at 60mph hits at forehead level (I an 6'1")