NCF6B
01-27-2014, 11:26 AM
I just finished installing the Kuryakyn side bag lights and turn signals. The directions are spot on and the are really "plug and play". As others have noted, removing and remounting the side bag doors is really a PIA. Two suggestions that I found helpful:
1, removing the reflectors is easier if you pre-heat them with a hair dryer or better yet, heat gun. Just be careful not to over heat and melt the plastic!
2, when remounting the bag doors, I found it easier to attach the stabilizer and attachment cord and reposition the hinges. Once you get the screws "hand started" you can loosen both of the attachments and finish tightening the screws. I mention this because it sounds almost "counter intuitive" to do it this way. It also helps to have a second pair of hands to help when remounting.
They are finally mounted and look and work great. From my "For what it's worth" collection NCF6B
1, removing the reflectors is easier if you pre-heat them with a hair dryer or better yet, heat gun. Just be careful not to over heat and melt the plastic!
2, when remounting the bag doors, I found it easier to attach the stabilizer and attachment cord and reposition the hinges. Once you get the screws "hand started" you can loosen both of the attachments and finish tightening the screws. I mention this because it sounds almost "counter intuitive" to do it this way. It also helps to have a second pair of hands to help when remounting.
They are finally mounted and look and work great. From my "For what it's worth" collection NCF6B