PDA

View Full Version : Black Highway Pegs...



Purple Helmet
06-01-2013, 07:28 AM
Hi Guys....
Are there any after market "black" highway pegs for the F6B?

chipmaker
06-01-2013, 07:40 AM
yes.........

chipmaker
06-01-2013, 07:42 AM
Well soon...


http://www.kuryakyn.com/Products/4339/Ergo-III-Cruise-Mounts

Phantom
06-01-2013, 11:07 AM
Hi Guys....
Are there any after market "black" highway pegs for the F6B?

COMING SOON from RIVCO !!!!!! :icon_cool::yes:

micky_foccer
06-01-2013, 03:12 PM
http://www.rivcoproducts.com/products/home.php?cat=221

chipmaker
06-01-2013, 03:28 PM
http://www.rivcoproducts.com/products/home.php?cat=221

Aren't those the ones that didn't fold back on one guy and tore open his valve cover, when his bike fell over in the garage???

https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcTNt0wypoBwLKuQJsu3Q5OSPhWW5WxaG Iza1vIyQ2puNHeXef5X

MYSTER REE
06-01-2013, 04:55 PM
I have the Kuryakyn ERGO II CRUISE MOUNTS with mini arms. Looks and ride great. When I figure out how to post pictures, I will.

gamersince1976
06-01-2013, 08:33 PM
Aren't those the ones that didn't fold back on one guy and tore open his valve cover, when his bike fell over in the garage???

https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcTNt0wypoBwLKuQJsu3Q5OSPhWW5WxaG Iza1vIyQ2puNHeXef5X

To be fair - yes, it was the Rivco Aero Pegs that caused that horror story. But I'm still going to take the chance. My understanding was that the pegs on that bike weren't specifically made for that model (which is why we're still waiting for them to be released) - which may account for why they punched through rather than popped off.

Plus, I'm not planning on ever leaving them in the open position other than when going down the highway. Accidents may happen, but from the moment I saw them I knew these were the pegs for me.

Though I'm leaning toward chrome rather than black :icon_biggrin:

Hook
06-01-2013, 09:05 PM
Like these????
http://i106.photobucket.com/albums/m250/hooksup2/0412131015_0001_0001_zps6fe4e33f.jpg (http://s106.photobucket.com/user/hooksup2/media/0412131015_0001_0001_zps6fe4e33f.jpg.html)
http://i106.photobucket.com/albums/m250/hooksup2/0412131014a_0001_zps9b944013.jpg (http://s106.photobucket.com/user/hooksup2/media/0412131014a_0001_zps9b944013.jpg.html)
http://i106.photobucket.com/albums/m250/hooksup2/0412131014_0001_0001_zpsf573bb73.jpg (http://s106.photobucket.com/user/hooksup2/media/0412131014_0001_0001_zpsf573bb73.jpg.html)

micky_foccer
06-02-2013, 09:39 AM
Well stated Gamer. Ditto.

Texas TC
06-02-2013, 01:25 PM
Aren't those the ones that didn't fold back on one guy and tore open his valve cover, when his bike fell over in the garage???

https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcTNt0wypoBwLKuQJsu3Q5OSPhWW5WxaG Iza1vIyQ2puNHeXef5X

As good ad these things look, this picture and the potential of such damage is a deal breaker for me. Im waiting to buy the black Ergo III's.

chipmaker
06-02-2013, 01:48 PM
As good ad these things look, this picture and the potential of such damage is a deal breaker for me. Im waiting to buy the black Ergo III's.

Me too.....

Phantom
06-02-2013, 01:59 PM
The damaged cylinder head top cover to replace will cost around $210

Just collapse the pegs when you place the sidestand down :iduno:

Hook
06-02-2013, 07:32 PM
The damaged cylinder head top cover to replace will cost around $210

Just collapse the pegs when you place the sidestand down :iduno:That's what I do..

gordonrule
06-06-2013, 07:21 PM
Well guys and girls, I am getting my Highway pegs from RIVCO Products tomorrow . I will post pictures on what they look like on bike.

Darkknight
06-08-2013, 03:40 PM
Hook, those look sweet also and probably more adjustable.

How tall are you? I'm wondering about the Ergo 2 or 3.
I haven't seen the 3 in black yet but I was told it may be coming. I think the 3 has a longer reach but I may be getting them confused. Anyway, they look nice!

TCC
06-08-2013, 03:50 PM
Like these????
[URL=http://s106.photobucket.com/user/hooksup2/media/0412131015_0001_0001_zps6fe4e33f.jpg.html]

Looks nice. Powder or paint? How much?

Bama Bagger
10-22-2013, 10:12 PM
Like these????
http://i106.photobucket.com/albums/m250/hooksup2/0412131015_0001_0001_zps6fe4e33f.jpg (http://s106.photobucket.com/user/hooksup2/media/0412131015_0001_0001_zps6fe4e33f.jpg.html)
http://i106.photobucket.com/albums/m250/hooksup2/0412131014a_0001_zps9b944013.jpg (http://s106.photobucket.com/user/hooksup2/media/0412131014a_0001_zps9b944013.jpg.html)
http://i106.photobucket.com/albums/m250/hooksup2/0412131014_0001_0001_zpsf573bb73.jpg (http://s106.photobucket.com/user/hooksup2/media/0412131014_0001_0001_zpsf573bb73.jpg.html)

Hey Hook,

Which version of the Kuryakyn Ergo is that, II or III? They look really good on your bike!

Please advise...Thanks!

Steve 0080
10-22-2013, 10:16 PM
Here ya go..... these are totally different than the ones in the Pic above ..... I have a set of the Black ones for sale !!!


http://www.youtube.com/watch?v=SZQzJMM5BGE

d-shark
10-26-2013, 12:25 PM
Black Anodized Model KA Mick-O-Pegs. I have a 34" inseam and these allow me to to completely stretch out my legs. Many different models available for different peg locations and rider inseam lengths.

Other pegs can not be mounted any lower than the horizontal engine guard without seriously compromising cornering clearance. The higher peg location of other pegs is probably fine for those with shorter inseams.

Being taller these really work great for me. The black finish matches well and appears to be very durable. No visible scuffs on pegs yet which has been a surprise since I often pull rocks out of the tread on my boots.



https://lh4.googleusercontent.com/-2aVNp7m1xVQ/Umvsz46EA7I/AAAAAAAAAgY/A55xWgrsGC8/w649-h865-no/IMG_20131026_112308.jpg https://lh5.googleusercontent.com/-neYvz_7vjYw/Umv1KAjq8MI/AAAAAAAAAiY/YR5VxgevI2g/w649-h865-no/IMG_20131026_112352.jpg



https://lh3.googleusercontent.com/-BsISH9S0tGQ/UmvshXhdnfI/AAAAAAAAAgM/D6awiPP38eo/w649-h865-no/IMG_20131026_112145.jpg https://lh3.googleusercontent.com/-mDGCQyDl4Sg/Umvwr7TXtyI/AAAAAAAAAhQ/zq9JwRDebcw/w649-h865-no/IMG_20131026_112032.jpg

Hook
10-26-2013, 01:20 PM
Hey Hook,

Which version of the Kuryakyn Ergo is that, II or III? They look really good on your bike!

Please advise...Thanks!Sorry for me being so slow to respond:icon_doh: There powder coated because nobody had black ones.

Bama Bagger
10-27-2013, 05:18 AM
Sorry for me being so slow to respond:icon_doh: There powder coated because nobody had black ones.

Thanks Hook...so these are Kury Arms and Ergo II's you sent out to have powder coated black, correct?

Hook
10-27-2013, 11:21 AM
Thanks Hook...so these are Kury Arms and Ergo II's you sent out to have powder coated black, correct?Yes! Kind of expensive Cost me about $200+ for the pegs and $100 for powder coating :icon_lol:

jakec
10-27-2013, 12:42 PM
The black Mick-O-Pegs will cost more than that but I have them on my Wing and I really like them, I think I will have to get a set for my F6B.
Jakec

Scotrod
10-27-2013, 12:59 PM
I'm "wishfully thinking" the Ergo 3's might extend a little farther rearward than the 2's did,

I don't need or want a 'straight leg' position,,, Just a 'different' location slightly ahead of OEM.

I'd be happy with a peg/board just outboard of the rear edge of the valve cover.

Basically, in the 'general vicinity/slightly lower than' the mick-o's on D-sharks 6 when its in the upright position:

https://lh4.googleusercontent.com/-2aVNp7m1xVQ/Umvsz46EA7I/AAAAAAAAAgY/A55xWgrsGC8/w649-h865-no/IMG_20131026_112308.jpg

d-shark
10-28-2013, 09:00 AM
Scotrod,

FYI, the Mick-O-Pegs on my bike are available in 3 different models KA, KD & KL. I have the KA where the peg is approximately 6" off the riding surface when extended. The other two models are approximately 8" and 9" above the riding surface when extended. They also have other styles that offer quite a few different peg positions.

Scotrod
10-28-2013, 10:22 AM
Yeppers, I've seen the riding/wonderful site. No shortage of choices.

I have a 30 inseam. Seems like all the 'highway pegs' are for longer legs. 'Stretching out' is not my goal. 6-10 inches ahead of OEM is all I'd ever need.

Might need the 'short guy' version of the Mick-o's,,, I hear they also have a version you can used to mount aftermarket pegs on. Kinda fond of the Kury mini boards.

fl1madmax
11-10-2013, 09:58 PM
Hey Hook,

Which version of the Kuryakyn Ergo is that, II or III? They look really good on your bike!

Please advise...Thanks!

Now that there right color I love them !1675

Bama Bagger
11-15-2013, 05:02 AM
I'm still trying to decide on which pair of black cruising pegs to go with. Here is a question for the forum riders whom have any brand installed...on my 2001 Valkyrie Interstate I had Kuryakin Chromed Pilot Pegs mounted and during the Summer months having your legs up by the 1500 Fat Ladies Jugs you could fry a leg quickly. Are there similar issues with the F6B's 1800 engine case?

Any information is greatly appreciated!!!

F6B-RICH
11-15-2013, 07:26 AM
I'm still trying to decide on which pair of black cruising pegs to go with. Here is a question for the forum riders whom have any brand installed...on my 2001 Valkyrie Interstate I had Kuryakin Chromed Pilot Pegs mounted and during the Summer months having your legs up by the 1500 Fat Ladies Jugs you could fry a leg quickly. Are there similar issues with the F6B's 1800 engine case?

Any information is greatly appreciated!!!



I used my Rivco highway pegs thru the summer months and I had no problem with heat of the motor frying a leg.I am over 6 feet tall so my legs are spread and I usually have them away from the engine.Now on a shorter rider your legs might be more straight and closer to the engine and may fell more heat if any.

Scotrod
11-15-2013, 08:51 AM
Anybody have the Ergo 3's? I believe black has not been shipped out yet,,,

Say a set of chrome ones @ Kury tent in Galveston. Sure hang out away from the bike a fair amount,,,

Bama Bagger
11-15-2013, 11:55 AM
Anybody have the Ergo 3's? I believe black has not been shipped out yet,,,

Say a set of chrome ones @ Kury tent in Galveston. Sure hang out away from the bike a fair amount,,,

Scotrod, Those are really what I am stalling for. Kury's web site says they'll be in sometime??? :poke: Patience is not one of my better cards!!! :021:

Gperson
12-22-2013, 10:55 AM
Got tired of waiting on the Ergo III's... Bought the 4056 Ergo II's

Took them to a local powder coater, $100.00 (12 individual pieces) and 3 days later I got exactly what I wanted. So far very happy with my purchase. The paint finish matches perfectly and is probably better than the original Kuryakyn chrome. If you are on the fence, go ahead and take the plunge...you will be glad you did.

ps...not sure if the pics will be right side up or not...did not see a way to adjust.

Ride safe,
G

rocket247
01-21-2014, 02:42 AM
Hi Guys....
Are there any after market "black" highway pegs for the F6B?

Yeap there are Kuryakun iso 3, I have the chrome ones , more than happy with them and the look3775

Cheers Rocket 247 Australia

CarolinaRider
01-21-2014, 07:25 AM
I got an email from Cruiser Customizing yesterday that the Black Kury III's I ordered back in October are shipping out today.

Also have a Utopia backrest on the way.

Hornblower
01-21-2014, 10:07 AM
I got an email from Cruiser Customizing yesterday that the Black Kury III's I ordered back in October are shipping out today.

Also have a Utopia backrest on the way.

Hey, Carolina Rider, you need to swing over our way to compare mods and talk F6B. Deer Slayer and I are located not that far from you and, between the two of us, we can get you into all kinds of trouble with mods :icon_rolleyes:.

Scotrod
01-21-2014, 11:19 AM
I got an email from Cruiser Customizing yesterday that the Black Kury III's I ordered back in October are shipping out today.

Also have a Utopia backrest on the way.

I'd like to see the Black Ergo's come with mini-boards,, Yeah, I can piece em together, but,,,, MO $$$$.

Deer Slayer
01-21-2014, 04:40 PM
Hey, Carolina Rider, you need to swing over our way to compare mods and talk F6B. Deer Slayer and I are located not that far from you and, between the two of us, we can get you into all kinds of trouble with mods :icon_rolleyes:.

"fireybat" How about Morrow Mountain State Park north of NC 24/27 on a weekend some time? :thumb:

Mike
01-21-2014, 07:36 PM
Here is yet another look.

CarolinaRider
01-21-2014, 08:25 PM
DeerSlayer

I Pm'd hornblower early and we exchanged emails. We will have to get together soon. Sounds like a great time.

Deer Slayer
01-21-2014, 11:07 PM
DeerSlayer

I Pm'd hornblower early and we exchanged emails. We will have to get together soon. Sounds like a great time.

:cheers: Roger....

Dirtstiff's F6B
01-22-2014, 12:00 AM
Here is yet another look.

Got the same, they work perfectly with bar risers and driver backrest and look like they belong on the bike.
I now have multiple options for comfortable riding positions.