higher passenger pegs

[Pap]

The wife is complaining that the passenger pegs are too low for her and that her legs are resting on the side bar/hand rail.
Is there anything out there that we can get to raise the location for her foot position?
Pegs or floor board, doesn't matter.
Thanks

[Pap]

OK, I guess if you type in the right words things come up. I found multiple floor board risers but no foot peg risers. Looks like she will be getting some sort of floor boards soon so she can be more comfy.
She is SO SPOILED !!! LOL !!

[Rustysocket]

Im interested in what you come up with. We have the same problem

[Pap]

Im interested in what you come up with. We have the same problem

I'll post with pics once we find something.
Always open to suggestions.

[Deer Slayer]

Look at our fine vendors here. Look under adjustable passenger or co-rider pegs. The standard Wing ones should fit.:cheers:

[Steve 0080]

Watch that the card does not melt but these are nice....Wing Stuff Site


http://wingstuff.com/products/32932-classic-steel-adjustable-passenger-boards?from_search=1

[Pap]

Watch that the card does not melt but these are nice....Wing Stuff Site


http://wingstuff.com/products/32932-classic-steel-adjustable-passenger-boards?from_search=1

The wife doesn't like those.
We saw a square plate that raises the peg/floorboard 2". Might just make a pair of them and go with the transformer floorboards.
Still looking around yet.

[shooter]

Rivco makes some nice ones. I just bought a set. You can raise them as much as 3 inches. Pricey but the quality is amazing. The chrome mounting plates are made on so that would be another $75. Wingstuff has them.

[Plan B]

Hi there,

my wife has the problem the same. There are only 2 cm = 1 "higher then everything is better.
Provisionally only times of special wood panel, a pattern made and tested, super.
In the winter, then it comes out of metal.

Images I do morning

Greeting Oliver / Germany

[Plan B]

hello,

the Pictures are raddy, a hope you can good see.

Oliver

[bob109]

hello,

the Pictures are raddy, a hope you can good see.

Oliver

Nice work! Very innovative!:clap2: Anyone with simple carpentry skills should be able to make those without much trouble:icon_biggrin:

[JGF6B]

I'll post with pics once we find something.
Always open to suggestions.


Any solutions here? I could use a 3" rise in my passenger pegs. Maybe 2" if brought rear a bit.

[Pap]

I made my own using some scrap 1/4" aluminum from work. If you can get a couple pcs cut for you, It's easy enough to drill the holes where you want them.

[JGF6B]

I made my own using some scrap 1/4" aluminum from work. If you can get a couple pcs cut for you, It's easy enough to drill the holes where you want them.

Cool, thanks.