SpeedyWho
06-24-2013, 09:25 PM
I've wanted the Kury ISO grips since I bought the bike, I find the OEM to small in diameter for my hands. I like the idea of the throttle boss that Kury makes, but it does not fit the F6B ISO grips made for heated grips. I figured it would be close enough and I'd make it work. It was much easier than I thought it would be. The holes are very close and all you need to do is grind a small amout of Material away froom the back side and your good to go. Like this:
http://i378.photobucket.com/albums/oo223/code4130/iso2_zpse2e1b9c6.jpg
As you can see I trimed the rubber back and ground it down just a little
And from the front you'd never know
http://i378.photobucket.com/albums/oo223/code4130/iso3_zpsbc422e25.jpg
Simple as that, the barend weights still fit, and work with everything as well. Its super easy it took less than 10min total. Hope this helps anybody who wants to use this setup and thought it wouldn't work
http://i378.photobucket.com/albums/oo223/code4130/iso1_zps8746f31e.jpg
http://i378.photobucket.com/albums/oo223/code4130/iso2_zpse2e1b9c6.jpg
As you can see I trimed the rubber back and ground it down just a little
And from the front you'd never know
http://i378.photobucket.com/albums/oo223/code4130/iso3_zpsbc422e25.jpg
Simple as that, the barend weights still fit, and work with everything as well. Its super easy it took less than 10min total. Hope this helps anybody who wants to use this setup and thought it wouldn't work
http://i378.photobucket.com/albums/oo223/code4130/iso1_zps8746f31e.jpg