Bike Lift Finished

[nox]

Finally got my hydraulic bike lift set in the floor. So much easier to ride on and ride off with no ramps etc.

http://i183.photobucket.com/albums/x27/bigbanko/P1020110_zps8eabee92.jpg (http://s183.photobucket.com/user/bigbanko/media/P1020110_zps8eabee92.jpg.html)

http://i183.photobucket.com/albums/x27/bigbanko/P1020111_zps117a3ce0.jpg (http://s183.photobucket.com/user/bigbanko/media/P1020111_zps117a3ce0.jpg.html)

[Larry]

Finally got my hydraulic bike lift set in the floor. So much easier to ride on and ride off with no ramps etc.

http://i183.photobucket.com/albums/x27/bigbanko/P1020110_zps8eabee92.jpg (http://s183.photobucket.com/user/bigbanko/media/P1020110_zps8eabee92.jpg.html)

http://i183.photobucket.com/albums/x27/bigbanko/P1020111_zps117a3ce0.jpg (http://s183.photobucket.com/user/bigbanko/media/P1020111_zps117a3ce0.jpg.html)

Very Nice

[tinknocker]

Sweet!...now I'm jealous

[naga viper]

Very nice!

[Jimmytee]

:yes:

[Phantom]

:Saweeet smilie:

[Steve 0080]

Sweet!...now I'm jealous

ME TOO !!!!!! Can you send me a PM on how you did this ...I may copy... looks like just cut out the floor, pour a new lower floor and done...what about the sides ? Must be something there if a car comes in ??? Thanks in advance !!!!!

[nox]

ME TOO !!!!!! Can you send me a PM on how you did this ...I may copy... looks like just cut out the floor, pour a new lower floor and done...what about the sides ? Must be something there if a car comes in ??? Thanks in advance !!!!!

Steve

I just cut a hole in the floor 5/8 inch bigger than the lift and dug down a little deeper. I used brick pavers for the floor and filled any small gaps with dry mortar mix. Once I was happy it was level and straight I wet it all down to set the mortar mix.
I then mixed up some mortar and plastered around the inside edges to hold any loose dirt back and filled in the small trench I dug to lay the hydraulic hose in. The hose lays in some 2" plastic plumbing pipe.

I don't park any cars in my shed but this lift has a capacity of 1800lbs or 800kg

[Steve 0080]

Thanks...this will be my summer project !!!! Already located the lift !!!

[53driver]

Already located the lift !!!

Is it chromed diamond plate? :icon_mrgreen:

[Steve 0080]

Please don't give out the secreats !!!!! and the flashing lights when it raises !!!!

[Phaedrus]

Very nice. Would love to see video of it in operation.

[Steve 0080]

I have a 8' ceiling in my garage...need to see if it will fit.....my last house I built and it had 10' ceilings...I may be sad..... :icon_frown:

[Exbmwrider]

Awesome! Every man cave should have one! Maybe two! You guys have to stop this. Every time I think I'm done, something like this gets posted. I now have a winter project.

[kjelders]

Very nice! This is on my list to do for my mancave!

[Old Ryder]

Can you come over and put one in my garage. I'll buy the beer. I'll Even get the good stuff!

[nox]

Can you come over and put one in my garage. I'll buy the beer. I'll Even get the good stuff!


If you look at the photo carefully you will see the beer tap sticking out from the fridge door.

This was so I didn't get thirsty while digging the hole.

[Old Ryder]

After considering all things, it may be better if I just moved into your garage! It's got everything I need right there-- shelter, bike lift, beer, etc....