PDA

View Full Version : GPS Mounts



Phantom
05-08-2013, 09:22 PM
Original post by "Kidder"

Please post sources

Texas TC
05-09-2013, 08:06 AM
Got my RAM mount off amazon. I installed the 12v outlet in the storage compartment. I can hook up a spiral charging cord to my Nuvi mounted on the RAM mount and my GPS is ready to function.

28

pittprof
05-10-2013, 02:55 PM
119

Here's what I did for my GPS. I used the RAM mount I had on my Valkyrie. I connected it to the clutch mount using spaces and longer bolts.

lewis/ec
05-10-2013, 08:27 PM
Here is our design. Mounts with one thumbscrew. Clamps to dash. Fits Ram diamond, cell, gps and satellite radio standard hole config.

http://www.electricalconnection.com/images/gps-1.jpg

http://www.electricalconnection.com/non-electrical/gps-mount.htm

pblair
05-13-2013, 09:01 PM
I drilled and tapped a 1/4 20 hole in the handle bar and screwed in the appropriate RAM ball. Connected a short arm and the Garmin 550 to the Ball and there you have it.

124

Cool Hand Luke
05-16-2013, 01:42 PM
Here's my mount. It is a perch mount from Kuryakyn, but I had to change it. The original design puts gps much closer to rider, too close for me to read proprerly. I think it is not a good design for F6B, maybe for a different bike. So I only used the black plastic perch mount arm and I made my own gps holder using the holder that came with gps. I drilled a small hole in the middle of Garmin gps holder and used the long screw that came with Kuryakyn mount. I also had to dremel plastic Kuryakyn arm to create a bit of angle so gps is easier to see, otherwise gps would have been straight.

It wasn't hard at all, I think that this is a very clean looking mount. I use gps all the time I ride. When on a road trip I would simply unsnapp the gps and take it with me or lock it on bike in storage.

MercuryF1
05-16-2013, 03:40 PM
Here is our design. Mounts with one thumbscrew. Clamps to dash. Fits Ram diamond, cell, gps and satellite radio standard hole config.

http://www.electricalconnection.com/images/gps-1.jpg

http://www.electricalconnection.com/non-electrical/gps-mount.htm

How does this compare to the Bracketron unit that you also offer for sale? (I am using a Zumo 660 GPS.)

Gumby
05-17-2013, 06:32 AM
My phone fits perfectly in the hole for the sound system screen. It fits deep enough that its shadowed and I can see it very well. If I'm using it for music then the GPS will interrupt for directions and I wouldn't have any information on the screen that isn't on the phone.

Any ideas for a clean easy on and off mount there?

pblair
05-17-2013, 07:59 AM
Here is our design. Mounts with one thumbscrew. Clamps to dash. Fits Ram diamond, cell, gps and satellite radio standard hole config.

http://www.electricalconnection.com/non-electrical/gps-mount.htm

Lewis, Do we have to drill a hole in the dash?

Steve 0080
05-17-2013, 10:32 PM
I am using these.........http://www.sierra-mc.com/products.asp?cat=173